Page 2
RMX Programmable Power Supply Protection Functions Quick Reference Guide Your programmable power supply is equipped with the following protection functions. If the protection function is activated, the alarm turns on, PART NO. Z1-006-652, IB031471 the output turns off, or the operation is restricted. Nov.2016 Press OCP •...
Page 3
CONFIG Settings Sensing External Control Press CONFIG and use the CURRENT knob to select the parameter you want The rear J1 connector can be used for external • Local sensing Output voltage control to set. Use the VOLTAGE knob to change its value. control or monitoring of the power supply’s current 3 1 2 1 0 1 9 8 7 6...
Need help?
Do you have a question about the RMX Series and is the answer not in the manual?
Questions and answers