Skyjack SJ12 E Installation Manual
Dual flashing light
Hide thumbs
Also See for SJ12 E:
- Operation manual (92 pages) ,
- Service manual (170 pages) ,
- Installation manual (16 pages)
Related Manuals for Skyjack SJ12 E
Summary of Contents for Skyjack SJ12 E
- Page 1 DUAL FLASHING LIGHT INSTALLATION SJ12 E, SJ16 E , SJ20 E ANSI/CSA, CE, AS VERTICAL MAST 243009ACA August 2024...
- Page 2 This field kit is for MEWPs with serial numbers: SJ12 E: A601 000 906 - A601 999 999 SJ16 E: A601 000 906 - A601 999 999 SJ20 E: A601 000 906 - A601 999 999 Please refer to the website (www.skyjack.com) for contact information, other serial numbers, the most recent technical manuals, animations, and USB software.
- Page 3 It may also be used to alert against unsafe practices. IMPORTANT IMPORTANT indicates a procedure essential for safe operation and which, if not followed, may result in a malfunction or damage to the equipment. SJ12 E, SJ16 E , SJ20 E 243009ACA...
- Page 4 Notes 243009ACA SJ12 E, SJ16 E , SJ20 E...
-
Page 5: Table Of Contents
Having equipment with features and functionality that allow you and your customers to do more is a vital part of the utilization equation. Skyjack offers a range of accessory products to further expand a given products adaptability and your power to offer a truly flexible rental choice. -
Page 6: Section 1 - Kit Components
WASHER, Flat (0.312") 103887 • BOLT, Hex head (0.312"-18 x 3/4" Gr. 5) 103984 • NUT, Lock (0.313"-18) 102892 • CABLE, Tiewrap (Not shown) 243009 • INSTRUCTIONS, FLASHING LIGHTS - SJ20 (Not shown) SJ12 E, SJ16 E , SJ20 E 243009ACA... -
Page 7: Section 2 - Before You Start
Skyjack Service Department Wire cutter to have the missing parts sent to you. Do not ▪ Imperial wrench set attempt installation without the complete package. ▪ Metric wrench set SJ12 E, SJ16 E , SJ20 E 243009ACA... -
Page 8: Section 3 - Procedures
4. Install the LED lamps (216142 x 2) to the holes on each side of the base cover using the flat washers, lock washers, and nuts supplied with the lamp. SJ12 E, SJ16 E , SJ20 E 243009ACA... - Page 9 Label Black White To main harness 6. Route the flashing light harness as shown below. Connect the female terminals from the flashing light harness to the male terminals on both LED lamps. SJ12 E, SJ16 E , SJ20 E 243009ACA...
- Page 10 (103984 x 2), clamp the harness to the the previously removed hardware. cover. 10. Open the maintenance cover. 8. Use the cable ties (102892) included with the kit to secure the harness to the base cover. 243009ACA SJ12 E, SJ16 E , SJ20 E...
- Page 11 22 wire from the main harness. 13. Bundle the new wires neatly together with existing wires using zip ties. 14. Close the maintenance cover. 15. Remove the service pin and lower the platform. SJ12 E, SJ16 E , SJ20 E 243009ACA...
-
Page 12: Enable The Flashing Light Option
7. The display returns to the previous menu once the password has been entered. 8. Press the UP or DOWN arrow to search for the CONSOLE menu then press the MIDDLE button to select it. 243009ACA SJ12 E, SJ16 E , SJ20 E... -
Page 13: Section 4 - Testing
5. Perform the lift or lower function from the base control or the platform control box. ▪ Result: Both LED lamps flash. 4.2 Function test 1. Perform all of the function tests given in your unit’s Operating manual. SJ12 E, SJ16 E , SJ20 E 243009ACA... -
Page 14: Section 5 - Harness Diagram
Section 5 – Harness Diagram TO CHARGER-SIDE LED LAMP TO BASE CONTROL-SIDE LED LAMP LABEL COLOR BLACK WHITE TO MAIN HARNESS SJ12 E, SJ16 E , SJ20 E 243009ACA... - Page 15 Notes SJ12 E, SJ16 E , SJ20 E 243009ACA...
- Page 16 www.skyjack.com...
Need help?
Do you have a question about the SJ12 E and is the answer not in the manual?
Questions and answers