Attaching Pin On Bucket - RHINO 3109 Operator's Manual

Attaching Pin on Bucket

Always wear safety glasses when removing or installing buckets.
Always use a drift and hammer made of non-sparking material (a shot-filled mallet is
recommended) to install or remove pins. A steel hammer or drift could generate flying metal
fragments and result in injury. Always wear safety glasses when using a hammer to remove
or install pins.
Material buckets can be installed using tools
ordinarily available.
Attach bucket to lift boom frame and bucket
cylinders with four 3/8" cap screws and 3/8" lock
nuts (supplied with loader).
Attach bucket leveling rod (supplied with loader)
through hole in right outside bucket ear. Secure with
cotter pin.
3109 01/11
© 2011 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-8