Related Manuals for Rockler 92051
Summary of Contents for Rockler 92051
- Page 1 Power Tool Mobile Base Instructions Effective April 2024 Review full instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent version of instructions for your product.
-
Page 2: General Safety Warnings
(see the • Keep children and bystanders away from the tool instructions link on the product page at Rockler.com). operating area; • Do NOT use power tools in explosive environments, or in the presence of flammable liquids, fumes or dust;... -
Page 3: Parts List
PRODUCT SPECIFIC SAFETY WARNINGS > When positioning your tool on the base, do not attempt to > Use only hardwood such as oak or maple that has straight lift more than you are physically able. Get help from another grain and is free of knots, cracks or other defects. adult if necessary. -
Page 4: Base Assembly
Fig. 1 Base Assembly 2. Determine best placement of Foot Lever (4) and wheels, keeping in mind that the Foot Lever (4) must be attached When the Corner Brackets (1) are at 90° opposite the wheels. angles from each other the Wheels (3) should point in the same direction. - Page 5 Fig. 3 5. Feed the cut pieces through the metal frame and align them 9. Carefully drill the 7/16" diameter holes on all twenty locations so they are flush with the corners Fig. 2. detailed in the previous steps. 6. Mark placement of holes in the Corner Brackets (1) on the 10.
- Page 6 4. Adjust the leveling legs by raising the mobile base and loosening or tightening the hex nuts so the base is level. Check Rockler.com for updates. If you have further questions, please contact our Technical Support Department at 1-800-260-9663 or support@rockler.com Fig.
- Page 7 Fig. 8 Fig. 9 Fig. 10...
- Page 8 92051 Rockler Companies, Inc. 1-800-279-4441 Rev 04/24 4365 Willow Dr. Medina, MN 55340 www.rockler.com...
Need help?
Do you have a question about the 92051 and is the answer not in the manual?
Questions and answers