Installation Manual
H3C S7500E Series Ethernet Switches
5.6 Installing and Removing Air Filters (Optional)
5.6.1 Installing and Removing Air Filters onto/from the S7506E-V
Figure 5-8 Install a rear air filter on the S7506E-V
Figure 5-9 Install a front air filter on the S7506E-V
I. Installing air filters
Follow these steps to install air filters:
1)
Place an air filter closely against the air intake vent at the back of the chassis and
align the captive screws with the screw holes (see callout
2)
Tighten the captive screws to fix the air filter (see callout
Note:
There is also an air filter on the front of the chassis and it is installed in the same way.
II. Removing air filters
Remove the air filters in the opposite way you install them:
1)
Loosen the captive screws on the air filters.
Chapter 5 Hardware Maintenance
5-10
①
in
Figure 5-8).
②
in
Figure 5-8).