Removing Slide Rail - 3Com MSR 50-40 ROUTER. Installation Manual

The design of demountable slide rail greatly facilitates users to extend their services. The slide rail
is fixed on chassis through special structure. When you need to install a DFIC, you only need to
uninstall the rail and install the module. The rail may deviate out of external force when you install a
DFIC, thus the DFIC on the other side cannot be installed normally. You can right the rail manually
and then install the DFIC normally.
When installing a DFIC, it is recommended that you fasten the release screw first and then install
the DFIC M on the other side of the rail.

Removing Slide Rail

Figure 3-14 Unfasten the screw
Figure 3-15 Remove the slide rail
Refer to the installation and removal of FIC slide rail for those of SIC slide rail.
3-13