Advertisement
Advertisement
Table of Contents
Related Manuals for Danfoss ET500
Summary of Contents for Danfoss ET500
- Page 1 Operator’s manual Danfoss ET500 Crimp machine...
-
Page 2: Safety Instructions
8. DO NOT OVER PRESSURIZE. while it is in operation. Do not exceed the 10,000 psi hydraulic pressure supplied to the machine. NOTE: All 2 | © Danfoss ET500 Crimp machine operator’s manual... -
Page 3: Specifications And Accessories
18-20 ft. lbs. assembly torque. the crimper. degree adapter to the pump pressure port (Male NPTF threads should be tightened following the hex-marking procedure of 2 to 3 turns past hand tight). © Danfoss ET500 Crimp machine operator’s manual | 3... -
Page 4: Description Of Components
PowerSource crimp spec tool). If the spacer ring has a clearance notch, ensure that the notch is aligned with the opening in the front of the pusher. 4 | © Danfoss ET500 Crimp machine operator’s manual... -
Page 5: Maintenance Intervals
© Danfoss ET500 Crimp machine operator’s manual | 5... - Page 6 Danfoss ET500 Crimp machine operator’s manual Crimp machine components 6 | © Danfoss ET500 Crimp machine operator’s manual...
- Page 7 Flat Head Screw ET500C-0011 Bench Mount Bracker 140-15984-03 Flat Head Screw ET500C-0012 Handle 140-06925 Slide Plate Bushings ET500C-0013 Pivot Bolt 140-06924 Slide Flange ET500C-0014 Angle Adjust Knob T-400-G Grease ET500C-0015 Side Plate © Danfoss ET500 Crimp machine operator’s manual | 7...
- Page 8 Phone: +86 21 3418 5200w Danfoss can accept no responsibility for possible errors in catalogs, brochures, and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.
Need help?
Do you have a question about the ET500 and is the answer not in the manual?
Questions and answers