1. Manuals
  2. Brands
  3. AVANT Manuals
  4. Tractor Accessories
  5. A21166
  6. Operator's manual

AVANT A21166 Operator's Manual

Round bale grab for 300-700-series loaders
Hide thumbs Also See for A21166:
Table of Contents

Advertisement

Quick Links

Download this manual
Operator's manual for Attachment
Operator's
Operator's
Operator's
Round bale grab
Product number:
Please read this manual carefully before using the equipment, and follow all
instructions.
Keep this manual for later reference.
manual for Attachment
manual for Attachment
manual for Attachment
300-700-series loaders:
Round bale grab 2011 1
A21166

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A21166 and is the answer not in the manual?

Questions and answers

Related Manuals for AVANT A21166

Summary of Contents for AVANT A21166

  • Page 1 Operator’s manual for Attachment Operator’s Operator’s manual for Attachment manual for Attachment manual for Attachment Round bale grab Product number: 300-700-series loaders: A21166 Please read this manual carefully before using the equipment, and follow all instructions. Keep this manual for later reference.

  • Page 2: Table Of Contents

    Round bale grab 2011 1 CONTENTS Foreword..........................3 Designed purpose of use ......................3 Safety instructions for using the bale grab................3 Bale grab specifications ......................4 Assembly of the bale grab....................... 5 ..................5 5.1. Mounting the bale grab to the loader ..............

  • Page 3: Foreword

    With Avant and bale grab you are able to pile three round bales on top of each other. Sturdy, yet lightweight construction allows best possible effective load that depends on the model of the loader.

  • Page 4: Bale Grab Specifications

    4(12) • Ensure that the unattached bale grab is supported properly and ensure that the attachment is properly supported during all inspection and maintenance procedures. • Pay attention to the surroundings and any other persons and machines moving in the vicinity.

  • Page 5: Assembly Of The Bale Grab

    These instructions are applicable to mounting the attachment to the boom quick attach plate of AVANT loaders that have standard quick attach locking. If your machine is equipped with a hydraulic locking and/or serial quick attach system, refer to the relevant manuals for additional mounting instructions.

  • Page 6: Connecting And Disconnecting The Hydraulic Fittings

    6(12) Step 2: • Turn the quick attach plate hydraulically to an obliquely forward position. The angle between the loader front plate and attachment coupling should be about as shown in the adjacent picture. • Drive the loader onto the attachment. If your loader is equipped with a telescopic boom, you can utilise this.

  • Page 7: Instructions For Use

    7(12) Keep the fittings as clean as possible; use the protective caps for the quick couplings on both the attachment and the loader. Dirt, ice, etc. may make using the fittings significantly more difficult. Note that the protective caps on the loader and the attachment can be fastened to each other during operation to reduce the accumulation of dirt.

  • Page 8: Slope Operation And Uneven Terrains

    If there are signs of leaking, to check the component, hold up a piece of cardboard in the area where a leak is suspected. Finding any of these faults means that the hydraulic hose or component must be replaced. Spare parts are available from your nearest AVANT retailer or service point.

  • Page 9: Cleaning And Lubricating The Bale Grab

    9(12) 7.1. Cleaning and lubricating the bale grab Clean the attachment regularly. You may use a pressure washer and a mild detergent to wash the equipment. Avoid spraying directly at the hydraulic components or using solvents when washing. In addition, mind the labels on the attachment.

  • Page 10: Spare Parts List

    10(12) 7.2. Spare parts list...

  • Page 11: Warranty Terms

    11(12) 8. Warranty terms Avant Tecno Oy grants a warranty of one year (12 months) from the date of purchase for the attachment it manufactures. The warranty covers repair costs as follows: • Work costs are covered, if the repair is not performed at the factory.

Table of Contents