PROAIM BP-302-00 Manual

Mitchell base to bowl camera adapter

Download this manual

Mitchell Base to Bowl Camera Adapter | 100mm.

(BP-302-00)

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Need help?

Do you have a question about the BP-302-00 and is the answer not in the manual?

Page 1 Mitchell Base to Bowl Camera Adapter | 100mm. (BP-302-00) All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright...
Page 2 What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. 2 x Bolts (Size: 1/4 x 25) Washer Mitchell Base to Bowl Camera Adapter (100mm) 2 x Mini Washers 1 x L-Type Allen Key (Size: 3/16”) (Size: 6 x 12 x 1.5) Mitchell Base to Bowl Camera Adapter (100mm) Setup...
Page 3 • Place the washer on the fluid head screw at the bottom of the stand (Not Included). Aligning it with the center. • Tighten the washer firmly using the knob to secure the assembly. • Loosen the knob and press the red button to release the top plate.
Page 4 • Setup is now ready for use. YOUR PROAIM MITCHELL BASE TO BOWL CAMERA ADAPTER | 100MM. ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.