Audio Setup - AL Tech Portable MPEG Player Manual

2.2.2 Audio Setup

This is guide for setting audio output of Mpeg4 Player. You can use Stereo or Digital 5.1 ch..
Analogue/DCPM: Select when you connect the supplied AV cables (Red / White) to TV or Audio set directly.
Encoded Digital: Select when you want to listen through 5.1Ch by connecting receiver (or amplifier) with supplied coaxial
cable.
① Turn on Mpeg4 Player and press [SETUP] in
MediaType Selection screen.
<Setup Procedure>
② Move to 'Audio Setup' icon and press
[ENTER].
③ Move to Audio Output Mode that you want
and press [ENTER].
④ Finally, press [SETUP] again for saving
configurations.
21