Push MODE
+/– key
ing the Data [+] key once will show the next
ing confirmation of the change. If the Data [+]
(Set) key is pressed again within one second,
the new swash plate type is selected and the
"?" confirmation will disappear. If no confirma-
tion is made within one second, the display will
revert back to the prior swash plate type and no
change will be made.
WARNING
All of the swash plate parameters are reset
when the swash plate type is changed. Please
proceed through the entire setup process be-
fore attempting to fly the model.
S
WASH
Use the mode [+] / [-] keys to
navigate the setting menus.
(Confirmation screen)
B
S
ASIC
ETTING
-
-