Throttle Speed "Thspd - FUTABA 3PKS Instruction Manual

Throttle Speed "THSPD"

Sudden trottle trigger operation on a slippery
road only causes the wheels to spin and the ve-
hicle cannot accelerate smoothly. Setting the
throttle speed function reduces wasteful battery
consumption while at the same time permitting
smooth, enjoyable operation.
Operation
-Throttle servo (amp) operation is delayed so that the drive wheels will not spin even if
the trottle trigger is operated more than necessary. This delay function is not performed
when the trottle trigger is returned and at brake operation.
-1 speed, 2 speed, or 3 speed can be selected.
neutral
high
1 SPEED
A delay is set over the entire
throttle range.
Operation display
While the throttle speed function is ON, the LED blinks, (If LED color is not selected
as off). also appears on the initial screen and menu screen.
Calling the setup screen
*Calling from menu screen
(Opening Screen)
Menu screen call
by
MENU 1
MENU1/2 selection
by button
MENU 2
Select the function
by button
Press t he button
* When the direct call button is set,
the setup screen is also called by the
following method:
(Opening Screen)
Press t
he
DIRECT SEL
Press the button set
at this function.
high
ALL
2 SPEED
A delay can be set in 2 ranges
with TGP1 as the boundary.
•Select the setting item by
* b l i n k s a t t h e c u r r e n t
button
button
Throttle Speed "THSPD"
With "THSPD": Quick start without skidding
Without "THSPD": Slow start due to skidding
neutral
LOW
TGP1
HIGH
button
setup item.
(Throttle system)
neutral
high
LOW
TGP2 TGP1
MID
HIGH
3 SPEED
A delay can be set in 3 ranges with
TGP1 and TGP2 as the boundaries.
The LED blinks while the throttle
speed function is on.
Mode selection
One speed, 2 speed, or 3
speed can be selected at the
"MODE" item. The setting
item (screen) depends on the
mode. The figure at the left is
the 3 speed setup screen.
59