Channel 3 Position "Ch3 - FUTABA 3PKS Instruction Manual

Channel 3 position "CH3"

The channel 3 servo position can be set from the transmitter. When CH3 is assigned to a
dial by the dial function (p.80), this setting is linked to that dial.
When CH3 is not assigned to a dial, it can be set with this screen.
Calling the setup screen
*Calling from menu screen
(Opening Screen)
Menu screen call
by
MENU 1
MENU1/2 selection
by button
MENU 2
Select the function
by button
Press t
he button
* When the direct call button is set,
the setup screen is also called by the
following method:
(Opening Screen)
Press t he
DIRECT SEL
Press the button set
at this function.
Channel 3 adjustment
1
(Position adjustment)
Use the (+) and (-) buttons to adjust the channel 3 position.
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for direct selection, press the (END)
button once).
button
button
Channel 3 position "CH3"
(3rd channel system)
Setup Item
RATE :Channel 3 position
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen
Channel 3 position (POSI)
0~100%
Initial value: 100%
107