Ready To Sew Window After Embroidery Begins - ELNA 8200 Instruction Manual

Ready to Sew
1
30 min
Size
P
2
1
GS
Snow
Seashell
5776
Gray
White 5597
00001 ST/NO
Mode
q w
Rethread and start.
2
5 colors
109x84mm
A(F): 126x110mm
A Z
3 4
Green
5802 5757
Dust
Edit
Jog
ST
e r
Ready to Sew Window After Embroidery
Begins
When you start to sew, the ready to sew window
will change – jog keys disappear and current stitch
q
count , stitch minus/plus keys and return carriage
key appear.
Thread Breaks
If the needle thread breaks, the machine will stop
and show a warning message. Touch the "Return"
key. Rethread machine.
w
Stitch Minus/Plus keys
Touch the "–" key to move the hoop back to
the point before the thread break occurred.
Each time you touch the "–" key the hoop
moves back 10 stitches. Each time you touch
the "+" key the hoop moves forward 10
stitches.
e
Jog/ST key
Touch this key before sewing – the jog keys
disappear and the stitch minus/plus keys
appear.
r
Return Carriage key
Since this is a very important key to use before
turning off your machine it appears here as
well as in the mode selection window (see
page 10).
29