ELNA 6001 Instruction Book page 27

PDFMAILER.DE
Close zipper. Turn zipper face up (right seam allow-
ance forms a small fold at basting line) and smooth
zipper teeth away from seam. Attach foot with right
side pin. Reset straight stitch length to 2.2. Starting
at the bottom, sew through the folded seam allow-
ance and zipper tape.
Stop just before the zipper foot reaches the slider on
the zipper tape. Lower the needle slightly into the
fabric. Raise the zipper foot and open the zipper.
Lower the foot and stitch the remainder of the seam.
Close the zipper and spread the fabric flat with the
right side facing up. Baste through the opened seam
allowance and zipper tape.
Move the zipper foot to the left side pin. Guide the
edge of foot along the zipper teeth and stitch
through the garment and zipper tape. Stop about 5
cm (2") from the top of the zipper.
Slightly lower the needle into the fabric. Raise the
foot, remove the basting stitches and open the zip-
per. Lower the foot and stitch the remainder of the
seam, making sure the fold is even.
26