Table of Contents
Advertisement
PDFMAILER.DE
Inserting the Bobbin
Place the bobbin in the bobbin case with the thread
running counterclockwise.
Guide the thread into notch A on the front side of the
bobbin case.
Hold the bobbin with your right hand and pull the
thread to the left, through the tension spring blades.
Continue pulling the thread lightly until the thread
slips into notch B.
Pull out about 15 cm (6") of thread.
Replace the bobbin cover plate.
Refer to the chart shown on the bobbin cover plate
to check the threading.
18
Hide quick links:
Advertisement
Table of Contents
