Mapping To Multiple Monitors - Wacom INTUOS 3 User Manual

• Q P L and Q
UICK OINT EFT
12x12 / A4 Oversize, and 12x19 / A3 Wide tablets) divide the tablet into two independent areas: a large
area for drawing, and a small area for quick navigation. Both areas are mapped to the screen area
defined in the P
ORTION OF
be selected and deselected using the screen Pop-up Menu. See customizing the Pop-up Menu for more
information.
Q P L
UICK OINT EFT
QuickPoint area to the lower
left corner of the tablet.

MAPPING TO MULTIPLE MONITORS

When you are working with more than one monitor, your tablet will map to the monitors based upon how
your system is configured.
• By default, if more than one monitor is in use and you are in extended monitor mode, the tablet will map
to all monitors as if they were one large display.
• If you are in mirror mode, the tablet will map to the entire space on each monitor and the screen cursor
will be displayed on each monitor simultaneously.
Please refer to your hardware and operating system documentation for details on configuring your computer
and operating system for use with multiple monitors.
After you have correctly configured your computer for use with multiple monitors, you can then adjust the
tablet mapping by opening the Wacom Tablet control panel and changing the appropriate options.
When your system is configured with multiple monitors, you can assign the D
ExpressKey. This enables you to toggle the current tablet mapping and screen cursor between the primary
display and your other monitors. See working with Display Toggle for more information.
Contents
P R . These options (available for Intuos3 9x12 / A4-regular,
UICK OINT IGHT
S dialog box, or to the entire display by default. These options can also
CREEN
sets the
Contents
Index
Drawing areas
Index
Q P R
UICK OINT IGHT
QuickPoint area to the lower
right corner of the tablet.
Note: The QuickPoint area and
drawing area are indicated by crop
marks on the tablet work surface.
T function to an
ISPLAY OGGLE
45
sets the
45