Table of Contents
Advertisement
Quick Links
Operating manual
EN
High pressure cleaner
therm 35-1
therm 875-1
therm 895-1
therm 11 5-1
therm 1525-1
therm 1000 RP
therm 1200 RP
therm 1400 RP
This manual is a translation of the original manual.
Read and conform safety instructions before use!
Keep instructions in a safe place for later use and
pass them on to any future user.
www.kraenzle.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Kranzle therm 1000 RP
Summary of Contents for Kranzle therm 1000 RP
- Page 1 35-1 therm 875-1 therm 895-1 therm 11 5-1 therm 1525-1 therm 1000 RP therm 1200 RP therm 1400 RP This manual is a translation of the original manual. Read and conform safety instructions before use! Keep instructions in a safe place for later use and pass them on to any future user.
-
Page 2: Table Of Contents
Description of appliance Contents Page Description of appliance ......................2 Contents ..........................3 Tecnical data ..........................4 Overview “This is what you have purchased” ................7 General rules ..........................9 Safety precautions – accident prevention ..................9 That's what you have to observe ..................12 Kränzle- technology .......................14 Water and cleaning system ................14 Lance and spray gun ..................14 Total stop system ....................14... -
Page 3: Tecnical Data
Tecnical data therm 635-1 therm 875-1 therm 895-1 therm 1165-1 therm 1525-1 Operating pressure, 3 - 13 MPa 3 - 17 MPa Operating pressure, 3 - 19,5 MPa 3 - 16,5 MPa 3 - 12,5 MPa continuously adjustable (30 - 130 bar) (30 - 170 bar) continuously adjustable (30 - 195 bar) - Page 4 Tecnical data therm-1 This is what you have purchased: therm 1000 RP therm 1200 RP therm 1400 RP Operating pressure, 3 - 20 MPa 3 - 19 MPa 3 - 17 MPa Kränzle high-pressure cleaner therm-1 continuously adjustable (30 - 200 bar)
-
Page 5: General Rules
: therm RP General rules This is what you have purchased Range of application This machine may only be used for cleaning facades, vehicles, containers, pavement slabs, stables, machines and smilar objects. Kränzle high-pressure cleaner therm RP with hose drum and 20 m steel-weave Inspections high-pressure hose NW 8 The machine must be inspected according to the “Guidelines for Liquid Spray Devices”... -
Page 6: Safety Notes - This Is Prohibited
Safety notes Safety notes - This is prohibited! Never operate the machine without supervision. Never direct the high-pressure water jet The machine may only be operated by persons who have been instructed accordingly. towards the operator him-/herself or towards other persons, not even for Some parts inside the machine, all water conducting components and all metal parts cleaning clothing or shoes. -
Page 7: Please Note - Important
Please note - important! Please note - important! Lack of water Insufficient quantity of electricity If there are too many collectors in your Lack of water occurs more often than you proximity connected to the network at the probably believe. The more powerful a same time, the available voltage and the high-cleaner is the greater is the danger current intensity may decline. -
Page 8: Kränzle Technology
Kränzle technology Kränzle technology Water and Cleaning System High pressure hose and spraying device The water is fed to the high-pressure cleaner under pressure (0,2 - 0,8 MPa, 2 - 8 bar The high pressure hose and spraying device supplied with the machine are made of high pre-pressure). -
Page 9: Thermostat
Kränzle technology Kränzle technology The innovative new percent mode now lets the user specify the switching duration of the Thermostat heater in percent using the "+" and "-" buttons (Pos. 3+4) (100% being the max. temperature) The thermostat controls the spray water rather than setting the desired temperature. -
Page 10: Heat Exchanger
Commissioning Heat exchanger Install holding devices for power cable. The water is forced through a heating coil by the high pressure pump. Heating coil: 38 m long - Content: 5 l of water - Heating capacity: max. 90 kW The fuel pump draws the oil from the tank through a filter and pumps it to the injector nozzle. -
Page 11: Usage As A Cold Water High Pressure Cleaner
Inbetriebnahme Push on HP hose to gun. Move machine to job site. Kränzle-therm appliances are movable machines with a sturdy chassis. Screw together HP hose and gun pressure-tightly. Steering the machine: To change Take care that all screw connections are pressure-tight. A leakage direction tilt machine by pressing a foot of gun, high-pressure hose or hose drum has to be repaired at once. -
Page 12: Usage As A Hot Water High Pressure Cleaner
Usage as a hot water high pressure cleaner Suction of detergents Method same as with cold water with detergent supply from the suction side: high-pressure cleaner, then ... Detergent injection on the pressur side, as you probably know it from other HP cleaners, Set desired temperature at consume approx. -
Page 13: Decommissioning - Frost Protection
Decommissioning - frost protection Care and Maintenance The machine must be disconnected from the power supply when 01. Switch off the machine - main switch to „0“- position servicing work is being carried out. The main switch should be 02. Cut off the water supply in position "0"... -
Page 14: Care And Maintenance (Weekly/Yearly)
Your fuel may contain particles of dirt, or impurities or water may get into the tank therm 1000 RP - 1400 RP: 0,8 l - 10 W 60 during refuelling. To protect the fuel pump the machine is equipped with a fuel filter. -
Page 15: Particular Rules, Directives And Inspections
Particular rules, directives and Pipeline plan inspections High pressure connection Inspections performed by Kränzle - measurement of earth line resistance - measurement of voltage and current - inspection of tension consistency with +/- 1530 V - pressure check of heating coil at 300 bar Detergent - visual and functional check as per the inspection sheet provided - exhaust fume analysis (see test strips provided) - Page 16 AC motor Three-Phase motor High pressure pump High pressure pump Pressure switch Motor Start/Stop Pressure switch Motor Start/Stop Pressure switch Burner release Pressure switch Burner release Flow controller Burner release Flow controller Burner release Float switch Lack of fuel Float switch Lack of fuel Photo cell Flame monitoring...
-
Page 17: Troubleshooting
Troubleshooting Troubleshooting Malfunction Cause of malfunction / remedy Displayed malfunctions Water supply DISPLAY Cause Action Water tank runs over. Float valve is dirty or defect. TARGET ACTUAL Water tank does not fill completely. Float valve is defect. Water filter is dirty. Water temperature at heating Operate appliance without heating Insufficient water inlet quantity. -
Page 18: Hot Water Mode
Troubleshooting Troubleshooting Malfunction Cause of malfunction / remedy Hot water mode Heating (burner) The fuel manometer shows the fuel pressure. If no pressure is shown, check if Fuel pump/blower operates, but Set water temperature is reached. Increase burner does not heat. temperature on thermostat with rotary control - there is heating oil in the tank. -
Page 19: Small Repairs Do It Yourself
Small repairs do it yourself No water from the nozzle but the The pressure gauge shows full gauge shows full pressure: Most likely pressure although the gun has been the nozzle is blocked. closed. The pressure switch valve (Inside the pressure gauge there is no water but a switches constantly. - Page 20 Kleine Reparaturen mühelos selbstgemacht Possible cause no. 2: therm-1 The non-return valve is soiled Pressure gauge shows little or defective pressure, the water from the nozzle comes in squirts, Proceeding therm-1: The high-pressure hose vibrates. Unscrew pump outlet. Most likely the valves are soiled. therm RP Proceeding: Proceeding therm RP:...
-
Page 21: Inspection Report For Hp Cleaners
Inspection report for HP cleaners Inspection report for HP cleaners Inspection report on annually carried out Labour Safety Inspection (UVV) according to the Inspection report on annually carried out Labour Safety Inspection (UVV) according to the Guidelines for Liquid Spray Equipment. (This inspection sheet serves as proof for the completion of Guidelines for Liquid Spray Equipment. -
Page 22: Eg-Konformitätserklärung
The product is to be operated in conformity with this operating manual. The operating manual is deemed to be part of the warranty provisions. therm 1525-1: 1525 l/h therm 1000 RP: 960 l/h therm 1200 RP: 1140 l/h Any changes made to the safety devices of the product or instances of therm 1400 RP: 1320 l/h maloperation –... -
Page 23: Inspection Sheet
Inspection sheet Kränzle therm Steam phase checked Result of flue gas analysis Chemical valve checked Customer Start/Stop automatic and re-run delay checked Fuel shortage switch checked Thermostat function checked Burner function checked Water inlet temperature 5 6 7 8 9 10 11 12 13 14 15 °C All lines connected Water outlet temperature... - Page 25 Josef Kränzle GmbH & Co. KG Rudolf-Diesel-Straße 20 89257 Illertissen (Germany) sales @ kraenzle.com Made Germany www.kraenzle.com...
Need help?
Do you have a question about the therm 1000 RP and is the answer not in the manual?
Questions and answers