Chapter 1 Basic Router Configuration; Interface Port Labels - Cisco 1812W - Integrated Services Router Wireless Configuration Manual

Basic Router Configuration
This chapter provides procedures for configuring the basic parameters of your Cisco router, including
global parameter settings, routing protocols, interfaces, and command-line access. It also describes the
default configuration on startup. Note that individual router models may not support every feature
described throughout this guide. Features not supported by a particular router are indicated whenever
possible.
This chapter contains the following sections:
•
•
•
•
•
•
•
Each section includes a configuration example and verification steps, as available.
For complete information on how to access global configuration mode, see the
Configuration Mode"
commands used in the following tables, see the Cisco IOS Release 12.3 documentation set.

Interface Port Labels

Table 1
Table 1
Router
Cisco 1801
OL-6426-02
Interface Port Labels
Viewing the Default Configuration
Information Needed for Configuration
Configuring Basic Parameters
Configuring Static Routes
Configuring Dynamic Routes
Configuring Enhanced IGRP
section in Appendix A, "Cisco IOS Basic Skills." For more information on the
lists the interfaces supported for each router and their associated port labels on the equipment.
Supported Interfaces and Associated Port Labels by Cisco Router
Interface
Fast Ethernet LANs
Fast Ethernet WANs
ATM WAN
Wireless LAN
BRI
Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide
C H A P T E R
"Entering Global
Port Label
SWITCH and FE8–FE5 (top), FE x and
FE4–FE1 (bottom)
FE0
ADSLoPOTS
LEFT, RIGHT/PRIMARY
ISDN S/T
1
1-1