Related Manuals for Lightronics XC-40
Summary of Contents for Lightronics XC-40
- Page 1 XC-40 COMPACT PORTABLE DIMMER OWNERS MANUAL Revision 0.3 02/21/2008 www.lightronics.com 20080221 drp Lightronics Inc. 509 Central Drive Virginia Beach, VA 234354 757 486 3588...
-
Page 2: Table Of Contents
XC-40 WIRELESS OPTION DESCRIPTION INSTALLATION AND SETUP LINKING TO A WIRELESS EQUIPPED CONSOLE TO LINK AN XC-40 TO A CONSOLE UNLINKING AN XC-40 FROM A CONSOLE TO RELEASE THE LINK AT THE XC-40 TO RELEASE ALL LINKS AT THE CONSOLE... -
Page 3: Xc-40 Unit Description
02/21/2008 XC-40 UNIT DESCRIPTION LIGHTING LOAD CONNECTIONS The XC-40 is a four circuit compact dimmer with a load capacity of 600 Watts per circuit. Each circuit is protected by a 5 Amp fuse. It can be controlled in several ways - the most common being DMX-512. -
Page 4: Operation
SELECT button held down while consecutive addresses. FACt power is applied. The display briefly shows while the reset is being performed. The XC-40 is set During normal operation the LED display toggles as follows when a reset is performed: PACA... -
Page 5: Dimmer Setup
CHANNEL LIMITING MENU/NEXT until the display toggles between dC-A and the current curve setting. Each channel in the XC-40 can be set to limit the maximum power applied to a channel. This feature d C - A D i m can lengthen the life of lamps and prevent premature failures from power surges and high line voltage. -
Page 6: Chase Operation
( Push MENU/NEXT to advance to the next chase parameter (Chase Fade). CHASE OPERATION The XC-40 can run one of 16 chase patterns which CHASE FADE CHAS can be selected from the menus. The rate,... -
Page 7: Other System Sub Menus
LOCAL: Local control enables you to operate the XC-40 channels manually without an external controller. You can set a static scene and leave the unit as is. This may be useful for a store display or other situation where a continuous lighting scene is needed. -
Page 8: Xc-40 Wireless Option
XC-40 in the wireless mode. The XC-40 can link can even if is not in the wireless 1. Install the supplied antenna. The antenna threads mode but since the unit can operate in several other onto a SMA connector located in the end of the unit. -
Page 9: Unlinking An Xc-40 From A Console
C n F G A n t d or at the console. If done from the dimmer then only that specific XC-40 will be released from the link and it can then be linked by another compatible wireless Antd 4. Use to select controller or relinked to the same one. -
Page 10: Wall Station Remote Control
These units use specific individual scenes which have The XC-40 can store 64 preset scenes which can be been stored in the XC-40 on a "pile on" basis. In other activated by the smart remotes. These scenes are words multiple scenes will merge together in a grouped according to which type of smart remote can "greatest of "... -
Page 11: Example System - Xc42S And Smart Remotes
TW PAIR REMOTE DATA + REMOTE DATA + NOT USED NOT USED TW PAIR REMOTE V + REMOTE V + REMOTES INTERCONNECT CABLE FOR XC-40 SMART REMOTE APPLICATION 4 PIN 4 PIN SMART REMOTE SMART REMOTE CONNECTOR CONNECTOR SHIELD REMOTE COMMON... -
Page 12: Xc-40 And Smart Remotes Connectors
Hold MENU/NEXT for aprox. 5 seconds to exit from the menus. CREATING AND SAVING SCENES Scenes to be activated by an XC-40 dimmer must first be created and stored (recorded) in the dimmer pack. Scene recording stores the current intensity levels of... -
Page 13: To Record A Scene
Page 13 of 16 XC-40 COMPACT DMX DIMMER Version 0.3 OWNERS MANUAL 02/21/2008 A universal BLACKOUT scene (all channels OFF) is also available. It appears as scene number 00 in the menus. The blackout scene has a user settable fade time. -
Page 14: Menu And Display Operation Diagram
Page 14 of 16 XC-40 COMPACT DMX DIMMER Version 0.3 OWNERS MANUAL 02/21/2008 MENU AND DISPLAY OPERATION Pack Address P000 - P512 MENU MENU MENU MENU MENU NEXT NEXT NEXT NEXT NEXT PACA A-00 B-00 C-00 D-00 Exit PACA MENU NEXT 5 SEC. -
Page 15: Maintenance And Repair
Size 8.5"L X 6.75"W X 2.5"D Weight 3.25 Pounds Internal service on the unit by other than Lightronics authorized agents will void the warranty. If service is required, contact the dealer from whom you purchased the dimmer, or Lightronics Service Department, 509 Central Drive, Virginia Beach, VA 23454. -
Page 16: Warranty
A) If service is required, you may be asked to provide proof of purchase from an authorized Lightronics dealer. B) The FIVE YEAR WARRANTY is only valid if the warranty card is returned to Lightronics accompanied with a copy of the original receipt of purchase within 30 DAYS of the purchase date, if not then the TWO YEAR WARRANTY applies.
Need help?
Do you have a question about the XC-40 and is the answer not in the manual?
Questions and answers