Advertisement
Quick Links
Advertisement
Related Manuals for Resource Ito
Summary of Contents for Resource Ito
- Page 1 Assembly Instructions...
- Page 2 Warranties for all products purchased from Resource Furniture, LLC are only valid if the product has been properly assembled, Installed by a trained professional, and operated in accordance with the assembly instructions. Resource Furniture accepts no responsibility for any damage or injury caused by Improper Installation.
- Page 3 MAIN INSTRUCTIONS TRANSFORMING SYSTEM ASSEMBLY AND SAFETY Carefully read before proceeding! Follow with care all points of the assembly procedure, as per technical sheets and their sequence showed in the following pages, and all the safety rules indicated. The product is self-supporting and must be placed on a perfectly levelled floor. Due to the joint movement of the inter functional components, the freestanding models could present some extremely slight vibration or very small shift that, in case, can be avoided through fixation of the product to wall or to suface.
- Page 4 SWING CHAISE Ito OVERVIEW Freestanding MATTRESS SWING SWING MATTRESS SPECIFICATIONS Recommended weight: ~ 64 lbs Recommended weight: ~ 64Lbs Recommended dimensions: 79 1/2 x 60 x 7” Recommended dimensions: 79 1/2 x 60 x 7inches...
- Page 5 Ito OVERVIEW 65 / 2 1/2" 230 / 9" 2200 86 5/8" 860/ 33 7/8" 1390/54 3/4" 600/ 23 5/8" 550/ 21 5/8" 400/ 15 3/4" 1210/47 5/8" 1740 / 68 1/2" 350/13 3/4" 1850/ 72 7/8" 80/3 1/8" 675/26 5/8"...
- Page 6 Ito OVERVIEW...
- Page 7 Ito COMPONENTS HARDWARE TPSE M6X35 X 13 X 13 3,5X20 4X40 TBCE M4X18 TCCE M6X30 4,5X25 TBCE M6X35 TOOLS 2 PEOPLE REQUIRED...
- Page 8 STRUCTURE ASSEMBLY...
- Page 9 STRUCTURE ASSEMBLY B x13 180°...
- Page 10 STRUCTURE ASSEMBLY D x7 Back E x4...
- Page 11 STRUCTURE ASSEMBLY...
- Page 12 OPTIONAL WAND LIGHTING Drill 1/2” hole at 21 3/8” below upperbed structure panel (from inside) and 1 1/2” in from the side. Install mounting plate with provided wood screws, aligning the 1/2” drill holes. Wand Light Exploded Diagram Cord Length = 118” Front Back...
- Page 13 LEVELING THE STRUCTURE Ensure that the structure is level and plumb. To compensate for any floor unevenness, use the adjustable feet on the bottom panel (det. 1 4a) to level the structure. det.1...
-
Page 14: Bed Frame Assembly
BED FRAME ASSEMBLY F x6... - Page 15 BED FRAME ASSEMBLY...
- Page 16 BED FRAME ASSEMBLY...
-
Page 17: Shelf Assembly
SHELF ASSEMBLY... - Page 18 Installing the shelf IMG.9: Attach the shelf to the feet of the bedframe, as shown, using 4 (I) screws. OPENING THE BED IMAGE 10: Grasp the handle in the center of the shelf and pull down the bed, gently accompanying the bed with both hands until it reaches the ground.
- Page 19 MATTRESS & HEADBOARD INSTALLATION To balance the bedframe, adjust the spring tension controllers with the 8mm allen wrench provided. Turn clockwise to adjust the tension in order to close the bed with ease. Ensuring that each side of the bedframe is adjusted equally.
- Page 20 ASSEMBLY OF THE BOISERIE PANELS SOFA INSTALLATION Installing the boiserie panel: IMG.15 Insert and fasten the M metal shelf pins into the holes on the (15) boiserie panel using 2 (O) bolts each. IMG.16 Place the boiserie panel next to the bed and ensure panel is level and plumb. Attach the (P) wall bracket to the wall using the (Q) wall anchors provided.
- Page 21 SWING MODEL WITH SOFA ARM SWING MODEL WITH SOFA ARM nstalling the sofa arm support Installing the sofa arm support SOFA INSTALLATION IMG.20: attach the sofa arm support bracket (12) to the base (4) using machine bolts n°3 MG.20: attach the sofa arm support bracket (12) to the base (4) using machine bolts n°3 8MAx80, n°3 washers D8-24 and nut 8MA, as shown in the image below;...
- Page 22 SOFA INSTALLATION Installing the sofa seat and storage box IMG.22: Attach the sofa storage box (11) to the base (4) using (M) machine bolts. .
- Page 23 SWING CHAISE Operating the sliding chaise seat SOFA INSTALLATION IMG.25: The sliding chaise (14) starting from the closed position (flush with the front of the sofa seat);can be pulled forward into two different positions. IMG.26: The head rest can be raised into the relax position. To bring it back into the sitting position; pull it forward completely to disengage the locking mechanism which allows it to be moved back.
- Page 24 SOFA INSTALLATION Before opening the bed be sure that the clamps are correctly connected to the tube.
- Page 25 Tilting backrest and footrest...
- Page 26 SAFELY OPERATING YOUR ITO BED Make sure that any and all items on shelf are stable and secure at all times. Prior to opening bed, remove any items taller than approx. 12.” Remove back cushions. To store the cushions or bedding under seat, lift sofa seat from bottom front edge for Swing.
- Page 27 SAFELY OPERATING YOUR ITO BED Remove pillows and tuck bedding in on all sides around mattress. Close both mattress straps around the bedding. Stand in the middle of the bed, grasp front edge of bed frame and lift. Continue to lift bed frame as you walk forward toward wall.
- Page 28 ResourceFurniture.com...
Need help?
Do you have a question about the Ito and is the answer not in the manual?
Questions and answers