MikroTik LtAP LR8G LTE6 kit Quick Start Manual
MikroTik LtAP LR8G LTE6 kit Quick Start Manual

MikroTik LtAP LR8G LTE6 kit Quick Start Manual

Advertisement

LtAP LR8G LTE6 kit
LtAP LR8G LTE6 kit
Safety Warnings
Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
All installation methods for mounting an access point on any wall surface is subject to the acceptance of local jurisdiction.
The Installation of the equipment must comply with local and national electrical codes.
This product is intended to be mounted outdoors on a pole but can also be installed indoors. Please read the mounting instructions carefully before
beginning installation. Failure to use the correct hardware and configuration or to follow the correct procedures could result in a hazardous situation to
people and damage to the system.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your
own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be professionally installed.
This is a class A device. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate
measures.
Exposure to Radio Frequency
environment. This MikroTik device should be installed and operated no closer than 30 centimeters from your body, occupational user, or the general public.
Quickstart
Please follow these quick steps to set up your device:
Open the bottom lid;
Insert the Mini SIM card into the slot;
Connect the device to the power source;
Navigate to the network connections section on your computer and locate the wireless network named "MikroTik-...". Proceed to connect to it
ck the wireless passwords on the sticker)
Configuration should be made via a wireless network using a mobile application or you can use the 
Download and open 
"WinBox
Click on the MAC
address. The username is "admin" and there is no password
sticker)
;
For a manual update of the device, visit the products page at 
accessible under the 
Upload downloaded packages to the 
By upgrading your RouterOS software to the latest version, you can ensure optimal performance, stability, and security updates;
In the "QuickSet" menu set up the following: Choose your country, to apply country regulation settings;
Set up your wireless network password in the left field;
Set up your router password in the bottom field;
Find your 
LR Gateway ID
Extension slots and ports
(LtAP-2HnD&FG621-EA&LR8G)
Radiation: This MikroTik equipment complies with the European Union radiation exposure limits set forth for an uncontrolled
;
", and 
choose the "
Neighbors
"Support&Downloads"
 menu;
"WinBox
" "Files" menu and reboot the device;
 on the label within the product and register it in your Network Server.
" tab to find the device;
 
 (or, for some models, check user and wireless passwords on the
https://mikrotik.com/products
"WinBox
" configuration tool 
 to find your product. The required packages are
(che
https://mt.lv/winbox
;

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LtAP LR8G LTE6 kit and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for MikroTik LtAP LR8G LTE6 kit

  • Page 1 Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the European Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 30 centimeters from your body, occupational user, or the general public. Quickstart Please follow these quick steps to set up your device: Open the bottom lid;...
  • Page 2 Built-in 2 GHz wireless access point module, AP/station/bridge/p2p modes are supported. Onboard PIF antennas built-in, as well as MMCX connectors for external antennas (software selectable). Two miniPCIe slots and three SIM slots. Built-in GPS module with an external SMA connector. Gigabit Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X).
  • Page 3 RouterOS version and install the GPS package by dragging it to the Files menu. Enable GPS and start working: Enabling - /system gps set enable=yes; Setting antenna to external - /system gps set gps-antenna-select=external; Checking configuration - /system gps print. https://help.mikrotik.com/docs/display/ROS/GPS...
  • Page 4: Usb Usage

    LR usage For interface configuration please visit https://help.mikrotik.com/docs/display/ROS/Lora We recommend using our antenna kit, https://mikrotik.com/product/868_omni_antenna USB usage When using an LR card the USB port power will be switched off by the CPU. It cannot be used together with an LR card.  ...
  • Page 5: Minipcie Slot

    miniPCIe slot SIM card connectivity MiniPCIe 1 (top slot) supports PCIe and USB 2.0 cards but is shared with the USB 2.0 type A port (can use either the USB port or miniPCIe slot at the same time). It can be used only for SIM slot #1. MiniPCIe 2 (bottom slot) supports only USB (2.0 and 3.0) miniPCIe modems (no PCIe support).
  • Page 6: Reset Button

    MikroTik mobile app Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point. Scan QR code and choose your preferred OS.
  • Page 7 Familiarize yourself with the procedures for the proper transportation of the equipment to the designated disposal sites in your area. Note. The information contained here is subject to change. Please visit the product page on   www.mikrotik.com   for the most up to date version of this document.

Table of Contents