MikroTik L009UiGS-2HaxD-IN Manual

L009UiGS-2HaxD-IN
L009UiGS-2HaxD-IN
Safety Warnings
Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully before beginning installation. Failure to use the
correct hardware or to follow the correct procedures could result in a hazardous situation for people and damage to the system.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.
Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your
own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik devices must be professionally installed.
Setup
Make sure your Internet service provider is allowing hardware change and will issue an automatic IP address;
Connect your ISP cable to the first Ethernet port;
Connect the device to the included power adapter;
Connect your computer to the wireless network;
The configuration can be done through the wireless network using a web browser or mobile app. Alternatively, you can use a WinBox
configuration tool https://mt.lv/winbox
Open http://192.168.88.1
check user and wireless passwords on the
Click the"Check for updates" button and update your RouterOS software to the latest version;
For a manual update of the device, visit the products page at
accessible under the "Support&Downloads" menu;
Upload downloaded packages to the WebFig or Winbox "Files" menu and reboot the device;
Updating your RouterOS software to the latest version will ensure the best performance, stability, and security updates;
Choose your country, to apply country regulation settings;
Set up your wireless network password;
Set up your router password.
;
in your web browser to start configuration, user name: a
sticker);
dmin and there is no password by default
https://mikrotik.com/products to find your product. The required packages are
(or, for some models,