PROAIM P-ROTN-01 Assembly Manual

360 rotation vesa 75mm/100mm tilting monitor mount with 5/8” baby pin receiver

Download this manual

360° Rotation VESA 75mm/100mm Tilting Monitor

Mount with 5/8" Baby Pin Receiver

(P-ROTN-01)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

4 x Knobs

(Size: 4 x 12)

(Size: 4 x 16)

with washers

360° Rotation VESA

Monitor Mount

13mm Spanner

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Need help?

Do you have a question about the P-ROTN-01 and is the answer not in the manual?

Page 1 360° Rotation VESA 75mm/100mm Tilting Monitor Mount with 5/8” Baby Pin Receiver (P-ROTN-01) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Vesa Monitor Mount Setup • Match the threaded holes of the Vesa Monitor Mount and the 75mm Monitor (Not Included). • After aligning the Monitor Mount, insert the knob and tighten it. NOTE: Its four-knob mounting system is compatible with LCD (Not Included).
Page 3 • The monitor (Not Included) can be rotated 360° with the help of a locking lever as shown in the image. Vertical to Horizontal Repositioning (230° Tilting) (360° Rotation)
Page 4 YOUR PROAIM 360° ROTATION VESA 75MM/100MM TILTING MONITOR MOUNT ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.