Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Pullman Advance Commander 900
Summary of Contents for Pullman Advance Commander 900
- Page 1 Cordless Upright Vacuum Cleaner Model: VBUII...
-
Page 3: Specifications
Handle vibration does not exceed 2.5m/s² when operating on a smooth floor surface. The vacuum cleaner and charger are intended for indoor use only. Detectable power supply. Please contact Pullman Customer Service on 131 929 to find your local spare parts provider. -
Page 4: Before You Begin
1. BEFORE YOU BEGIN Congratulations on the purchase of your new Pullman Advance Upright vacuum cleaner Commander 900. Your Pullman Advance Upright has been manufactured to the highest quality and performance standards. We recommend that you read these instructions carefully to ensure peak cleaning performance and to extend the life of the upright vacuum cleaner. - Page 5 2. WARNING IMPORTANT service agent or similarly qualified person in order to avoid a hazard. 6. The vacuum cleaner and charger are intended for commercial indoors use only. 7. Do not unplug the charger by pulling on Always switch off the vacuum cleaner before the power cord.
- Page 6 2. WARNING (CONTINUED) 16. Before vacuuming, remove any large or sharp local garbage. Contact your local council for objects from the floor or cleaning surface in instructions on how to safely dispose of the order to prevent damage to the filter. battery.
- Page 7 WARNING the motor, and cooling-air system, clean if necessary. Blocked vents will cause the 1. WARNING - Before undertaking maintenance motor to overheat and may lead to premature operations or adjustments switch off failure. Warranty claims for this type of machine, and remove the battery.
-
Page 8: Connecting The Handle
3. ASSEMBLY Always switch off your vacuum cleaner and remove the charger from the charge point and remove the battery before assembling. Connecting the handle 1. The vacuum cleaner and the handle are packed separately and require assembly. 2. Remove the handle bracket by removing the two screws. 3. -
Page 9: Charging Battery
Charging Battery 1. When you receive your unit the battery is partially charged and will run for a short time. To fully charge the battery see Battery Charging section. 2. The battery is located on the back of the vacuum cleaner. It can be charged while installed on the vacuum cleaner, or the battery can be removed from the vacuum cleaner and charged independently (see removing and reinstalling the... -
Page 10: Battery Life Display
3. ASSEMBLY (CONTINUED) Battery life display 1. Press the button on the battery to illuminate the LED lights. 2. When the battery is fully charged there will be four green lights and one red light showing. 3. As the battery is discharged during use, the number of green lights showing will reduce from four to none. -
Page 11: On/Off Switch
4. INSTRUCTIONS FOR USE On/Off switch 1. Turn the switch on to use the vacuum cleaner. If the vacuum cleaner doesn’t turn on, check that the battery is charged. 2. Always unplug the charger from the Charge Point before use. Bare floor cleaning Your vacuum cleaner is equipped with a squeegee to improve its effectiveness in cleaning bare floors. -
Page 12: Vacuuming Under Furniture
4. INSTRUCTIONS FOR USE (CONTINUED) Vacuuming under furniture Your vacuum cleaner will lay flat on the floor for effective cleaning under beds and tables. 1. Press the Handle Release Pedal once for routine vacuum cleaning. 2. Continue to lower the handle to enable the vacuum cleaner to lay flat on the floor for cleaning under furniture. -
Page 13: Maintenance
5. MAINTENANCE Replacing the Vacuum Bag NOTE: Turn the vacuum cleaner off and remove the battery. 1. Unzip the bag compartment. 2. Remove the used vacuum bag by pulling the green bag collar tab away from the vacuum cleaner. Slide the used bag out of the bag holder which automatically seals the bag opening. -
Page 14: Removing And Reinstalling The Bottom Plate
5. MAINTENANCE (CONTINUED) Removing and reinstalling the bottom plate WARNING! To reduce the risk of electrical shock or injury from moving parts, turn the vacuum cleaner off and remove the battery before servicing or cleaning the vacuum cleaner. 1. Make sure the vacuum cleaner is turned Off. 2. -
Page 15: Replacing The Vacuum Belt
Replacing the vacuum belt WARNING! To reduce the risk of electrical shock or injury from moving parts, turn the vacuum cleaner off and remove the battery before servicing or cleaning the vacuum cleaner. NOTE: To ensure maximum cleaning efficiency, the belt should be checked regularly to be sure it is in good condition. -
Page 16: Troubleshooting
6. TROUBLESHOOTING Problems and solution Please contact Pullman Customer Support on 131 929 to find your local spare parts provider. Fault Cause Solution Cleaner will not switch Flat battery Connect the Battery to the on / Power indicator Battery Charger. -
Page 17: Spare Parts
Product SKU Product Description 33202261 Battery Pullman Advance VBUII 32440593 Bags 10pk Pullman Advance 33202262 Charger Pullman Advance VBUII 33301040 Motor Assy Pullman Advance 33158116 Pedal Assy Pullman Advance 32102330 Belt 2pk Pullman Advance VBUII 33788242 Agitator Pullman Advance VBUII... -
Page 18: Exploded Diagrams
8. EXPLODED DIAGRAMS Ref. No. Part No. Description X9184 33202261 Battery 05-4741-0000 32440593 Dust Bags 10pk 04-4074-0000 33202262 Charger Adaptor... - Page 19 Ref. No. Part No. Description D223-2300 33301040 Motor Assembly D223-0700 33158116 Pedal Assembly D014-0814 32102330 Belt 2pk D012-2300 33788242 Agitator...
-
Page 20: Conditions Of Warranty
This warranty does not apply to the valid only in the country where the cleaner is purchased. cost of replacing any parts of the Pullman Advance Upright due to Your Pullman Advance Upright must be operated in accordance...
Need help?
Do you have a question about the Advance Commander 900 and is the answer not in the manual?
Questions and answers