Related Manuals for Pullman A-031b
Summary of Contents for Pullman A-031b
- Page 1 IDEAL FOR: Restaurants Cafes Motels & Hotels School A-031b 15L WET & DRY JANITOR VACUUM CLEANER 1000W...
- Page 2 IMPORTANT Always switch off the cleaner and remove the plug from the electricity power supply before cleaning your appliance, when not in use or attempting any maintenance task. The cleaner must only be connected to an AC power supply at the voltage shown on the rating label. This cleaner should only be used for its intended purpose as described in this instruction manual.
-
Page 3: Before You Begin
This machine is equipped with a cord and plug. In the event that either of these parts get damaged, it must be repaired by a qualified technician. PULLMAN 15L WET & DRY JANITOR A-031b... -
Page 4: Know Your Product
4. Lid Handle 5. On/Off Switch 6. Lid Latches 8. Hose Inlet 9. Tank 10. Wet Pick Up Floor Tool 11. Combination Floor Tool 12. Dusting Brush 13. Crevice Tool 14. Upholstery Nozzle Technical Information Model: A-031b 220-240V~ 50Hz 1000W... - Page 5 1. Connect the 2-piece metal tube together. 2. Connect the handle on the hose to the tube. 3. Connect the tube to the desired cleaning accessory. 4. Connect the hose to the Pullman A-031b. PULLMAN 15L WET & DRY JANITOR A-031b...
- Page 6 ACCESSORIES Combination Floor Tool The Combination Floor Tool is ideal for vacuuming hard floors and carpets. Wet Pick Up Floor Tool The wet pick-up tool is ideal for wet applications. Fitting dusting brush and crevice tool To fit the accessories to the 2 piece metal tube, gently insert the tube into the top of the dusting brush or crevice tool.
-
Page 7: Operation
3. Turn the switch of the vacuum cleaner to position “I”. 4. Empty the dust tank or dust bag when it’s full or after each use. 5. The cloth filter also needs to be cleaned accordingly. PULLMAN 15L WET & DRY JANITOR A-031b... -
Page 8: Wet Vacuum Cleaning
OPERATION Wet Vacuum Cleaning 1. Ensure the cloth filter is removed before the cleaner is used. Remove 2. Turn the switch of the vacuum cleaner to position “I”. IMPORTANT: Empty the tank after each use. -
Page 9: Maintenance
3. The cloth filter bag can be washed under luke warm water. 4. Dry by airing for at least 24 hours. Recommend to change the filter every 6 months to maintain the good air flow. PULLMAN 15L WET & DRY JANITOR A-031b... -
Page 10: Specifications
SPECIFICATIONS Watts: 1000W Capacity: 15L Power Cable Length: 7m Net Weight: 8.5Kg TROUBLESHOOTING TROUBLE POSSIBLE CAUSE REMEDY Suction weakens or Clogged filter Brush dirt from filter. If condition cleaner runs hot continues, change filter. Air leak Check all fittings for tight fit (floor tool, hoses, etc.). -
Page 11: Customer Care
On/Off Switch 31110013 Combination Floor Tool 31110127 Hard Floor Squeegee Tool 31220268 Hose Assembly 31300393 Chrome Tube 31130062 Dusting Brush 31120071 Crevice Tool 33701473 Float Cage 33400148 Cloth Filter 31140059 Upholstery Tool 33701474 Latch PULLMAN 15L WET & DRY JANITOR A-031b... -
Page 12: Conditions Of Warranty
Conditions of warranty Your Pullman cleaner has a to repair or replace the cleaner, it will do so at its one year parts and labour own cost. warranty against product Electrical Home-Aids Pty Ltd is unable to accept defects and failures when the...
Need help?
Do you have a question about the A-031b and is the answer not in the manual?
Questions and answers