Do you have a question about the Steam Works SC388L and is the answer not in the manual?
Questions and answers
Robert
May 2, 2025
how to empty the water from the reservoir of the unit
1 comments:
Mr. Anderson
May 16, 2025
To empty the water reservoir of the Pullman SC388L:
1. Switch off the appliance and unplug it from the mains. 2. Allow the appliance to cool down. The water may still be hot even after 5 minutes. 3. Press the steam button to release any remaining pressure. 4. Lock the steam gun. 5. Open the tank cap by pressing it down and turning it counterclockwise slowly. Be cautious of escaping hot steam. 6. Pour out the water from the tank.
You may rinse the tank and shake it to loosen lime-scale before emptying.
Need help?
Do you have a question about the Steam Works SC388L and is the answer not in the manual?
Questions and answers
how to empty the water from the reservoir of the unit
To empty the water reservoir of the Pullman SC388L:
1. Switch off the appliance and unplug it from the mains.
2. Allow the appliance to cool down. The water may still be hot even after 5 minutes.
3. Press the steam button to release any remaining pressure.
4. Lock the steam gun.
5. Open the tank cap by pressing it down and turning it counterclockwise slowly. Be cautious of escaping hot steam.
6. Pour out the water from the tank.
You may rinse the tank and shake it to loosen lime-scale before emptying.
This answer is automatically generated