Subscribe to Our Youtube Channel
Related Manuals for Pullman PC4 + HEPA
Summary of Contents for Pullman PC4 + HEPA
- Page 1 IDEAL FOR: Restaurants & Cafes Motels & Hotels Offices Garages Shops 15L DRY VACUUM WITH HEPA 13 FILTER PC4 + HEPA 1200WATTS...
- Page 2 IMPORTANT Always switch off the cleaner and remove the plug from the electricity power supply before cleaning your appliance, when not in use or attempting any maintenance task. The cleaner must only be connected to an AC power supply at the voltage shown on the rating label. This cleaner should only be used for its intended purpose as described in this instruction manual.
-
Page 3: Before You Begin
This machine is equipped with a cord and plug. In the event that either of these parts get damaged, it must be repaired by a qualified technician. PULLMAN 15L DRY VACUUM PC4 + HEPA... -
Page 4: Know Your Product
KNOW YOUR PRODUCT Variable suction control 2. Two-piece tube 3. Hose 4. Carry handle 5. Canister 6. Hose inlet Gulper head 8. On/off switch 9. Power cord 10. Cord restraint 11. Connection latches 12. Wheels 13. Crevice tool 14. Upholstery brush 15. - Page 5 ASSEMBLY 1. Connect the hose handle to the first tube. 2. Connect the first tube to the second tube. 3. Connect the tube to the desired cleaning accessory. PULLMAN 15L DRY VACUUM PC4 + HEPA...
- Page 6 ASSEMBLY 4. Insert the hose end into the hose inlet. Turn clockwise to lock the hose in place. 5. Once assembled as per diagram, start the cleaner by pressing the on/off switch.
-
Page 7: Variable Suction Control
1. Feed a loop up through the cable restraint opening 2. Place the loop over the top of the cable restraint hook. 3. Pull down on the power cord to lock the cord onto the hook so it doesn’t slip. PULLMAN 15L DRY VACUUM PC4 + HEPA... -
Page 8: Fitting The Accessories
ACCESSORIES Gulper head Gulper head floor tool is ideal for cleaning on carpets and hard floors. Fitting the accessories To fit the accessories to the tube, gently insert the tube into the top of the crevice tool, dusting brush or uphostery tool. Crevice Tool –... -
Page 9: Operation
4. Once the dust bag is full, we recommend a new dust bag be fitted. 5. Turn the cleaner on by pressing the switch to the on position. Always turn the cleaner off when not in use. PULLMAN 15L DRY VACUUM PC4 + HEPA... -
Page 10: Maintenance
MAINTENANCE ATTENTION: DISCONNECT FROM MAINS POWER SUPPLY BEFORE DOING ANY MAINTENANCE WORK. ALWAYS OPERATE THE CLEANER WITH THE CLOTH FILTER BAG AND PAPER DUST BAG CORRECTLY INSTALLED. THIS WILL PREVENT ANY DAMAGE TO THE CLEANER AND HELP MAXIMISE CLEANING PERFORMANCE. Dust bag and filter cleaning and replacement 1. -
Page 11: Troubleshooting
PRODUCT DESCRIPTION Hose assembly 31220442 Crevice tool 31120005 Cloth filter 32200397 Castor wheel 33500348 Rear wheel assembly set 33500349 HEPA 13 filter 32200621 Clean Up Dust bag CU904 5pk 32440536 Telescopic Rod 31300282 PULLMAN 15L DRY VACUUM PC4 + HEPA... -
Page 12: Conditions Of Warranty
If Godfreys Commercial decide to repair or replace used in accordance with the terms your Pullman cleaner, it will do so at its own cost. Any and conditions of this warranty transportation costs involved in a claim under this statement.
Need help?
Do you have a question about the PC4 + HEPA and is the answer not in the manual?
Questions and answers