Page 2
IMPORTANT Always switch off the cleaner and remove the plug from the electricity power supply before cleaning your appliance, when not in use, or attempting any maintenance task. The cleaner must only be connected to an AC power supply at the voltage shown on the rating label. This cleaner should only be used for its intended purpose as described in this instruction manual.
This machine is equipped with a cord and plug. In the event that either of these parts get damaged, it must be repaired by a qualified technician. PULLMAN 60L WET & DRY CB60...
Page 5
1. Connect the 2-piece metal tube together. 2. Connect the handle on the hose to the tube. 3. Connect the tube to the desired cleaning accessory. 4. Connect the hose to the Pullman CB60. PULLMAN 60L WET & DRY CB60...
Page 6
ACCESSORIES Dry Pick Up Floor Tool The dry pick up floor tool is ideal for vacuuming hard floors. Do not use the dry pick up floor tool on carpets. Wet Pick Up Floor Tool The wet pick-up tool is ideal for wet applications. Fitting dusting brush and crevice tool To fit the accessories to the 2 piece metal tube, gently insert the tube into the top of the dusting...
OPERATION IMPORTANT: DISCONNECT THE CLEANER BEFORE CHANGING ACCESSORIES OR TO EMPTY THE CLEANER. Before turning on the Pullman CB60 Vacuum Cleaner, please check that the Drain Hose is secure to the tank Closed and the cap is fully closed. Dry Vacuum Cleaning 1.
OPERATION Wet Vacuum Cleaning 1. Ensure the cloth filter is removed before the cleaner is used. Remove 2. Turn the switch of the vacuum cleaner to position “I”. 3. You can determine the suction by using either 1 or 2 motors.
1. Release the connection latches to remove the canister lid. 2. Remove the cloth filter. 3. The cloth filter bag can be washed under luke warm water. 4. Dry by airing for at least 24 hours. PULLMAN 60L WET & DRY CB60...
Conditions of warranty Your Pullman cleaner has a to repair or replace the cleaner, it will do so at its one year parts and labour own cost. warranty against product Electrical Home-Aids Pty Ltd is unable to accept defects and failures when the...
Need help?
Do you have a question about the CB60 and is the answer not in the manual?
Questions and answers