Lithium 950 Congratulations on the purchase of Pullman Advance Lithium Backpack. Your Backpack has been manufactured to the highest quality and performance standards. We recommend that you read these instructions carefully to ensure peak cleaning performance and to extend the life of the Backpack.
Page 3
WARNING WARNING (CONTINUED) IMPORTANT! Always switch off the appliance To unplug, grasp the plug, not the power 18. Before carrying out any maintenance service 22. Never attempt to make any modifications before cleaning, when not in use or attempting cord. Use only Australian and New Zealand or cleaning the filters, always switch off the electrically to the vacuum cleaner and any maintenance tasks.
Page 4
10. Do not use the charger to charge a non-chargeable battery. 2. Only use the Pullman PL950 charger to Blower Port This handy blower port at the front of your Lithium 950 easily charge the battery. 11. Do not touch or insert objects into the (Patented) transforms your backpack vacuum into a blower.
1. BEFORE YOU BEGIN Before you start using your new Backpack you should read this instruction booklet carefully Comfort Support Vibration free harness with cushioning support inserts to ensure and make sure that you have understood its contents. If not, please contact the store where System weight is correctly centered on your hips.
Page 6
2. ASSEMBLY 3. CHARGING 1. Ensure that the power plug is plugged into the mains power WARNING! Always switch off the cleaner before fitting or removing accessories. supply. Insert the batteries into the charger. When the Connecting the hose charger indicator light turns green, the batteries are fully charged.
4. INSTALLING & REMOVING THE BATTERIES 5. ACCESSORIES Installing Floor Tool 1. Insert the batteries as shown ensuing that the batteries click The Patented Gulper Advance floor tool into position. is ideal for cleaning on carpets and hard floors. Important! Batteries must be fully charged prior to the first use. Carpet Hard Floors Removing...
Page 8
6. INSTRUCTIONS FOR USE IMPORTANT! Do not use the cleaner if the motor housing is damaged. 4. Pull down on the two Load Lifter Straps. Fitting Your Backpack Your Backpack comes with straps fastened for ease of packing. Before fitting the Backpack onto your back, first loosen the various harness straps.
Page 9
Operating Your Backpack Using the Blower Port 1. Ensure the batteries are installed into the cleaner. 1. Insert the hose into the blower port. Turn the hose end 2. Fit the unit onto your back (Please refer to the fitting clockwise until it locks into place.
7. MAINTENANCE Taking Off Your Backpack WARNING! 1. Switch off the cleaner. 2. Unclip waist strap and chest strap. Before any Maintenance and Cleaning – ensure the cleaner is turned off and the batteries are removed from the cleaner. 3. Loosen the shoulder straps slightly and slide the pad off one shoulder and then off the other shoulder –...
3. Squeeze the two HEPA filter grill tabs & remove the grill. If you come across a problem, please use this checklist for trouble shooting tips. Should you still need help, please ring Pullman Customer Care 1800 815 270 (Australia) 0800 282 288 (New Zealand)
9. SPARE PARTS 10. NOTES Number Part Description Part Number Filter Set (Exhaust & Pre-Motor Sponge Filter) 32201676 Vortex HEPA Filter Chamber 32201325 Cloth Filter Bag 32440477 Unifit 900 Dust Bags 32440418 Battery Set 33201667 Charger 33201669...
Pullman Service Agent or from the use of non-genuine parts. If any part is no longer available or manufactured, Electrical Home-Aids Pty *Two year warranty on parts and labour excluding the battery which has a one year warranty.
Need help?
Do you have a question about the LITHIUM 950 and is the answer not in the manual?
Questions and answers