Related Manuals for GIGAIPC QBiX-Expert Series
Summary of Contents for GIGAIPC QBiX-Expert Series
-
Page 1: Qbix-Expert Industrial Embedded System
QBiX-Expert-RPLA1340PH-A1 QBiX-Expert-RPLA1320PEH-A1 QBiX-Expert Industrial Embedded System Quick Start Guide www.gigaipc.com... -
Page 2: Copyright Notice
While reasonable efforts have been made in the preparation of this document to assure its accuracy, GIGAIPC assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. -
Page 3: Acknowledgement
Core, Atom are trademarks of Intel Corporation ITE is a trademark of Integrated Technology Express, Inc. • • IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines Corporation. All other product names or trademarks are properties of their respective owners. www.gigaipc.com... -
Page 4: Packing List
1 x 4-pin Terminal Blocks Male Plug (25IO0-2ESDV0- D2R) 2.5” HDD screw, M3x4L (25KS2-13004G-S0R) Thermal pad for SSD (25ST3-260200-T5R) Thermal pad for Memory (25ST3-200086-T5R) If any of these items are missing or damaged, please contact your distributor or sales representative immediately. www.gigaipc.com... -
Page 5: About This Document
(if any), its specifications, dimensions, jumper/ connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product. Users may refer to the GIGAIPC.com for the latest version of this document. www.gigaipc.com... -
Page 6: Safety Precautions
Make sure the device is installed near a power outlet and is easily accessible. 10. Keep this device away from humidity. 11. Place the device on a solid surface during installation to prevent falls 12. Do not cover the openings on the device to ensure optimal heat dissipation. www.gigaipc.com... - Page 7 18. D O N O T L E AV E T H I S D E V I C E I N A N U N C O N T R O L L E D ENVIRONMENT WITH TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES (SEE CHAPTER 1) TO PREVENT DAMAGE. 19. This equipment and PoE’s peripheral device are restricted for indoor usage. www.gigaipc.com...
-
Page 8: Fcc Statement
Skilled person have to pay special attention or take special protection. Only authorized by well trained professional person can access the restrict access location. (2) External metal parts are hot!! Before touching it, special attention or protection is necessary www.gigaipc.com... -
Page 9: Table Of Contents
Module (5G Module inclusion may vary based on local distribution) ..............23 C) M.2 SSD Installation: How to safely install the M.2 2280 SSD ..............24 D) Wireless Module: How to safely install the Module (Wireless Module inclusion may vary based on local distribution) ..............25 www.gigaipc.com... - Page 10 IGN_SW (Ignition Switch connector) ......43 3.2.9 HDMI2_21 (HDMI connector) ........44 3.2.10 USB3_LAN6 (USB 3.2 Gen 1 + 2.5GbE LAN Connector) ..................45 3.2.11 USB3_LAN5 (USB 3.2 Gen 1 + 2.5GbE LAN Connector) ..................46 3.2.12 USB20_1 (USB 2.0 connector) ........47 www.gigaipc.com...
- Page 11 SATA Configuration ............66 4.3.4 IT8786 Super IO Configuration ........67 4.3.5 Hardware Monitor ............68 4.3.6 S5 RTC Wake Settings ........... 69 4.3.7 Network Stack Configuration ........70 4.3.8 NVMe Configuration ............. 71 4.3.9 Offboard SATA Controller Configuration ...... 72 www.gigaipc.com...
- Page 12 4.3.17 Intel(R) Ethernet Controller I226-V - 10:FF:E0:3B:87:7E (M AC a d dres s may v ar ie d bas e d o n di f ferent motherboard)..............80 Chipset ................81 Security ................. 83 Boot ................86 Save & Exit ..............87 www.gigaipc.com...
-
Page 13: Chapter 1 - Product Specifications
Chapter 1 Chapter 1 - Product Specifications www.gigaipc.com... - Page 14 www.gigaipc.com...
-
Page 15: Specifications
2 x RJ45 LAN Ports 1 x COM Port (RS-232/422/485 & RI/5V/12V) 3 x COM Ports (RS-232/422/485) 4 x USB 3.2 Gen 1 Rear I/O 4 x USB 2.0 2 x HDMI 1 x Ignition support (3pin) 1 x 4-pin Terminal Block www.gigaipc.com... - Page 16 When using 19V Power DC in, total PoE could support to 45W. When using 24V or 36V Power DC in, total PoE could support to 50W. NOTE 2 : For 4-pin terminal block, please make sure each pin need to be connected, to keep the system operating normally. www.gigaipc.com...
-
Page 17: Chapter 2 - Qbix-Expert Industrial System Kit
Chapter 2 Chapter 2 – QBiX-Expert Industrial System Kit www.gigaipc.com... -
Page 18: Dimension
Dimension www.gigaipc.com... -
Page 19: Getting Familiar With Your Unit
(RS-232/422/485 & RI/5V/12V) 3 x COM Ports 2 x RJ45 LAN Ports (RS-232/422/485) 1 x 4-pin Terminal Block ＊ NOTE : For 4-pin terminal block, please make sure each pin need to be connected, to keep the system operating normally. www.gigaipc.com... - Page 20 10 minutes. [Bottom PCB Side] Information Information 2 x DDR5 SO-DIMM sockets 1 x M.2 slot 2280 M-Key 1 x M.2 slot 3052 B-Key 1 x M.2 slot 2230 E-Key with SIM slot support 2 x 2.5’’ Hard drive/SSD www.gigaipc.com...
-
Page 21: A) Memory Installation: Ddr5 So-Dimm
A) Memory Installation: DDR5 SO-DIMM Remove the memory bracket with 4 screws. Carefully insert SO-DIMM memory modules. Push down until the modules click into place. Carefully insert SO-DIMM memory modules. www.gigaipc.com... - Page 22 Push down until the modules click into place. Remove the release paper on the memory backet, and assemble the memory bracket with 4 screws. Make sure the thermal pad is fully compacted with the memory. www.gigaipc.com...
-
Page 23: B) 5G Module Installation: How To Safely Install The Module (5G Module Inclusion May Vary Based On Local Distribution)
Remove the screw from the screw hole. (Location : MSO3) Carefully insert the 5G module into the slot. Lock the screw in the middle. Remove the release paper and secure the heatsink. Make sure the thermal pad is fully compacted with the module. www.gigaipc.com... -
Page 24: C) M.2 Ssd Installation: How To Safely Install The
Remove the screw from the screw hole. Carefully insert the M.2 SSD into the slot, (Location : MSO2) and secure with the screw. Remove the release paper and secure the bottom cover. Make sure the thermal pad is fully compacted with the module. www.gigaipc.com... -
Page 25: D) Wireless Module: How To Safely Install The Module
Carefully insert the wireless module into the M.2 slot. Install the antenna on the left side Remove the release paper and secure the heatsink. Make sure the thermal pad is fully compacted with of the connection wireless module the module. down. www.gigaipc.com... -
Page 26: E) 2.5" Hdd/Ssd Installation: How To Install 2.5" Hdd/Ssd
E) 2.5” HDD/SSD installation: How to install 2.5” HDD/SSD Remove 2 screws to remove the HDD bracket. Secure 4 screws for each 2.5" HDD. If only one 2.5" HDD, please install it at the bottom. Install the HDD bracket , and secure with 2 screws. www.gigaipc.com... -
Page 27: Antenna Installation (Antenna Inclusion May Vary Based On Local Distribution)
Carefully insert the antennas into the Turn the antennas clockwise until they are connectors. completely secure on the connectors. [Left side] [Left side] [Right side] [Right side] Flip up the antenna heads so that they are perpendicular to the machine. www.gigaipc.com... -
Page 28: Connector Pin-Define
– – – – – – – – 2. DBP DIO DBP DIO Pin Pin Name GPIO-output_1 GPIO-input_1 GPIO-output_2 GPIO-input_2 GPIO-output_3 GPIO-input_3 GPIO-output_4 GPIO-input_4 3. Power Ignition switch DBP DIO Pin Pin Name Ignition 1 2 3 Power button www.gigaipc.com... -
Page 29: Support
2.10 Support ● For AVL list, go to: http://www.gigaipc.com ● To download the latest drivers, go to: http://www.gigaipc.com ● For product support, go to: http://www.gigaipc.com www.gigaipc.com... -
Page 30: Safety And Regulatory Information
At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal. www.gigaipc.com... -
Page 31: Chapter 3 - Hardware Information
Chapter 3 Chapter 3 – Hardware Information www.gigaipc.com... -
Page 32: Jumpers And Connectors
Jumpers and Connectors www.gigaipc.com... -
Page 33: Sodimm1 Sodimm2
Serial Ports COM1_2 COM 1 : RS-232/422/485 & RI/5V/12V COM3_4 COM2~4 : RS-232/422/485 JCOM1 COM 1 (COM RI# pin RI#/5V/12V Select) ME_DIS ME Disable jumper SODIMM1 DDR5 SO-DIMM Slots SODIMM2 M.2 slot, 3052 B-Key AT_CN AT/ATX power mode select jumper www.gigaipc.com... - Page 34 Code Description M.2 Slot, 2230 E-key SATA SATA 6Gb/s connector M.2 Slot, 2280 M-key CPU_FAN CPU fan connector www.gigaipc.com...
-
Page 35: Hp (Headphone Jack)
3.2.1 HP (Headphone Jack) www.gigaipc.com... -
Page 36: Pwr_Bt (Power Button With Led)
3.2.2 PWR_BT (Power button with LED) www.gigaipc.com... -
Page 37: Gpio_Cnt (General Purpose Input/Out Connector)
3.2.3 GPIO_CNT (General purpose input/out connector) GPIO Connector Connector PN Vendor SM40D1S1122113N0 FENYING Pin No. Definition GPIO-output_1 GPIO-input_1 GPIO-output_2 GPIO-input_2 GPIO-output_3 GPIO-input_3 GPIO-output_4 GPIO-input_4 www.gigaipc.com... -
Page 38: Support)
LAN Connector State Description Orange On 1Gbps data rate Green On 100Mbps data rate 10Mbps data rate Link / Connection/ Activity LED Speed LED Pin No. Definition Connector PN Vendor BI_DA+ JM37115-LAFF-4F FOXCONN BI_DA- BI_DB+ BI_DC+ BI_DC- BI_DB+ BI_DD+ BI_DD- www.gigaipc.com... -
Page 39: Sw1 (Dip Switch For Ignition Time Setting)
3.2.5 SW1 (DIP Switch for Ignition time setting) DIP switch setting SW1 SW2 SW3 SW4 Time Delay Switch setting (Default setting) 42m52s 14m39s 9m05s 6m25s 4m57s www.gigaipc.com... - Page 40 DIP switch setting 4m09s 3m34s www.gigaipc.com...
-
Page 41: Dc_In (Dc In 1X4 Pin Power Connector)
3.2.6 DC_IN (DC IN 1x4 pin power connector) Pin 1 DC IN connector Connector PN Vendor 753-81-04TW00 PINREX Connector type 1 2 34 1x4pin connector, pitch 2.5mm Pin No. Definition Power Power www.gigaipc.com... -
Page 42: Riser (Expansion For Lan Ports)
3.2.7 RISER (Expansion for LAN Ports) www.gigaipc.com... -
Page 43: Ign_Sw (Ignition Switch Connector)
3.2.8 IGN_SW (Ignition Switch connector) Pin 1 Ignition switch connector Connector PN Vendor ECH350RM-03P DINKLE Pin No. Definition Ignition Power button www.gigaipc.com... -
Page 44: Hdmi2_21 (Hdmi Connector)
3.2.9 HDMI2_21 (HDMI connector) HDMI 1 HDMI 2 HDMI connector Connector PN Vendor QJ11191-DFB1-4F FOXCONN Pin No. Definition Pin No. Definition HDMI_D2+ HDMI_CLK- HDMI_D2- HDMI_D1+ HDMI_SCL HDMI_D1- HDMI_SDA HDMI_D0+ HDMI_D0- HDMI_HPD HDMI_CLK+ www.gigaipc.com... -
Page 45: Usb3_Lan6 (Usb 3.2 Gen 1 + 2.5Gbe Lan Connector)
Pin No. Definition Pin No. Definition Definition Definition TX1+ TX3- TX1- TX2- TX2+ TX4+ TX3+ TX4- State Description USB3_RX1n USB3_RX2n Orange On 2.5Gbps data rate USB3_RX1p USB3_RX2p Green On 1Gbps data rate USB3_TX1n USB3_TX2n 100M&10Mbps data rate USB3_TX1p USB3_TX2p www.gigaipc.com... -
Page 46: Usb3_Lan5 (Usb 3.2 Gen 1 + 2.5Gbe Lan Connector)
Pin No. Definition Pin No. Definition Definition Definition TX1+ TX3- TX1- TX2- TX2+ TX4+ TX3+ TX4- State Description USB3_RX1n USB3_RX2n Orange On 2.5Gbps data rate USB3_RX1p USB3_RX2p Green On 1Gbps data rate USB3_TX1n USB3_TX2n 100M&10Mbps data rate USB3_TX1p USB3_TX2p www.gigaipc.com... -
Page 47: Usb20_1 (Usb 2.0 Connector)
3.2.12 USB20_1 (USB 2.0 connector) USB 2.0 Connector Pin No. Definition Pin No. Definition Connector PN Vendor UB1112C-Q8DF-4F FOXCONN www.gigaipc.com... -
Page 48: Com1_2, Com3_4 (Serial Ports)
3.2.13 COM1_2, COM3_4 (Serial Ports) COM 4 COM 2 COM 1 COM 3 Serial Port Connector Connector PN Vendor D20HB1102002P6JN FENYING RS-232 RS-422 RS-485 Full Duplex Half Duplex TXD- TXD+ RXD+ – RXD- – – – – – – – – – www.gigaipc.com... -
Page 49: Jcom1 (Com1 Ri# Pin Ri#/5V/12V Select)
3.2.14 JCOM1 (COM1 RI# pin RI#/5V/12V Select) Pin 1 JCOM1 Jumper Select Connector PN Vendor 220-97-03GB01 PINREX 1-2 Close: 5V (Power COM) PH06N53BAZ000 HORNGTONG Connector type 3-4 Close: RI (Stand COM) 2x3pin connector, pitch 2.0mm (Default-Setting) 5-6 Close: 12V (Power COM) www.gigaipc.com... -
Page 50: Me_Dis (Me Disable Jumper)
3.2.15 ME_DIS (ME Disable jumper) ME Disable Connector Connector PN Vendor 220-96-02GBK1 PINREX Connector type 1x2pin connector, pitch 2.0mm ME Disable jumper Default Enable www.gigaipc.com... -
Page 51: Sodimm1, Sodimm2 (Ddr5 So-Dimm Slots)
3.2.16 SODIMM1, SODIMM2 (DDR5 SO-DIMM Slots) www.gigaipc.com... -
Page 52: M2B (M.2 Slot, 3052 B-Key)
3.3V PCIE_TXP 3.3V PLT_RST WWAN_PWR_ CLK_N CK_REQ CLK_P PCIE_WAKE WWAN_ USB D+ Disable USB D- Pin No. Definition Pin No. Definition GPP_RESET M2B_DET M2B_DRP 3.3V WWAN_ 3.3V Disable2 3.3V USB3 RXN Connector PN Vendor USB3_RXP SIM_RST# 80149-8521 BELLWETHER SIM_CLK www.gigaipc.com... -
Page 53: At_Cn (At/Atx Power Mode Select Jumper)
AT/ATX power mode select jumper Connector PN Vendor 220-96-03GB001K PINREX A2015WV-03P6T JOINT-TECH Connector type 1x3pin connector, pitch 2.0mm Pin No. Definition AT MODE TXD5 ATX MODE Jumper setting 1-2 Close : AT mode. 2-3 Close : ATX mode.(Default setting) www.gigaipc.com... -
Page 54: M2E (M.2 Slot, 2230 E-Key)
M.2 E Key Connector CL_RST# WLAN_RXP CL_DATA WLAN_RXN CL_CLK CLK_DP CLK_DN Pin No. Definition Pin No. Definition SUSCLK CLK_REQ PLT_RST# PCIE_WAKE BT_Disable# USB_D+ WIFI_Disable# USB_D- Connector PN Vendor Pin No. Definition Pin No. Definition APCI0095-P002A LOTES 80152-8521 BELLWETHER WLAN_TXP www.gigaipc.com... -
Page 55: Sata (Sata 6Gb/S Connector)
3.2.20 SATA (SATA 6Gb/s connector) Pin 1 SATA Connector Connector PN Vendor 115B20-100020-G4-R STARCONN Connector type 1x20pin connector, pitch 0.5mm Pin No. Definition Pin No. Definition SATA1_RXN0 SATA0_TXP0 SATA1_RXP0 SATA0_TXN0 SATA0_RXN0 SATA0_RXP0 SATA1_TXP0 SATA1_TXN0 www.gigaipc.com... -
Page 56: M2M (M.2 Slot, 2280 M-Key)
3.3V PCIE_TX0_DP PLT_RST PCIE_RX3_DN CK_REQ PCIE_RX3_DP CLK_N PCIE_WAKE# M2_LED CLK_P PCIE_TX3_DN 3.3V PCIE_TX3_DP 3.3V Pin No. Definition Pin No. Definition 3.3V SUSCLK PCIE_RX2_DN 3.3V M2_SSD_ PCIE_RX2_DP 3.3V Detect 3.3V PCIE_TX2_DN 3.3V PCIE_TX2_DP PCIE_RX1_DN Connector PN Vendor PCIE_RX1_DP 2E0BC41-C85CM-LH FOXCONN www.gigaipc.com... -
Page 57: Cpu_Fan (Cpu Fan Connector)
3.2.22 CPU_FAN (CPU fan connector) Pin 1 CPU fan Connector Connector PN Vendor 85205-0470N ACES A1250WV-S-04PC JOINT-TECH Connector type Pin No. Definition 1x4pin connector, pitch 1.25mm Detect Speed control www.gigaipc.com... -
Page 58: Chapter 4 - Bios
Chapter 4 Chapter 4 – BIOS www.gigaipc.com... -
Page 59: Introduction
Execute command or enter the submenu Increase the numeric value or make ＋ changes Decrease the numeric value or make – changes General Help Previous Values Load Optimized Defaults Settings Save changes & Exit the BIOS Setup program Exit the BIOS Setup program www.gigaipc.com... -
Page 60: The Main Menu
LAN5 MAC Address Shows LAN5 MAC Address information LAN6 MAC Address Shows LAN6 MAC Address information LAN7 MAC Address Shows LAN7 MAC Address information LAN8 MAC Address Shows LAN8 MAC Address information LAN9 MAC Address Shows LAN9 MAC Address information www.gigaipc.com... - Page 61 ME FW version Shows ME firmware version Set the Date for the system System Date (Format : Week - Month - Day - Year) Set the time for the system System Time (Format : Hour - Minute - Second) www.gigaipc.com...
-
Page 62: Advanced
Advanced The Advanced menu is to configure the functions of hardware settings through submenu. Use arrow keys to move among the items, and press <Enter> to access into the related submenu. www.gigaipc.com... -
Page 63: Tpm Configuration
4.3.1 TPM Configuration Use TPM Configuration submenu to choose TPM interface. Item Description PTT : Internal TPM TPM Device dTPM : External TPM (When using External TPM module or Selection having TPM chip on MB) (Default setting) www.gigaipc.com... - Page 64 Disabled : Disables TPM feature None : No execution will be conducted (Default setting) Pending operation TPM clear : Set to clear data on TPM Enabled : Enables Platform Hiearchy (PH) Randomization. PH Randomization (Default setting) Disabled : Disables Platform Hiearchy (PH) Randomization. www.gigaipc.com...
-
Page 65: Cpu Configuration
Enabled : Enables Turbo Mode Turbo Mode Disabled : Disables Turbo Mode (Default setting) Command CPU to enter into low power consumption mode when CPU is under idle mode. C states Enabled : Enables C states (Default setting) Disabled : Disables C states www.gigaipc.com... -
Page 66: Sata Configuration
Intel VMD feature helps you to control and manage NVMe PCIe SSD. / Enable VMD Enabled : Enables Intel VMD feature controller Disabled : Disables Intel VMD feature (Default setting) Serial ATA Port 0 shows 2.5" SATA HDD/SSD information Serial ATA Port 1 www.gigaipc.com... -
Page 67: It8786 Super Io Configuration
Disabled : if Disabled, displays no configuration for the serial port Device settings : Serial Port 3 Display the specified Serial Port base I/O address and IRQ Configuration COM Port Mode : Serial Port 4 Choose RS-232, RS-422, or RS-485 feature Configuration www.gigaipc.com... -
Page 68: Hardware Monitor
4.3.5 Hardware Monitor Item Description CPU Temperature Shows current CPU temperature System Shows current system temperature Temperature www.gigaipc.com... -
Page 69: S5 Rtc Wake Settings
Enable or Disable System to wake on a specific time. Wake system Disabled : Disables system to wake on a specific time (Default setting) from S5 Fixed Time : Enables system to wake on a specific time (Format : hr : min : sec) www.gigaipc.com... -
Page 70: Network Stack Configuration
Disabled : Disables Ipv6 PXE Support Enabled : Enables Ipv6 PXE Support PXE boot wait time Wait time in seconds, or use ESC key to abort the PXE boot. Media detect count Number of times the presence of media will be checked. www.gigaipc.com... -
Page 71: Nvme Configuration
4.3.8 NVMe Configuration NVMe Configuration shows information when your M.2 NVMe PCIe SSD is installed. www.gigaipc.com... -
Page 72: Offboard Sata Controller Configuration
4.3.9 Offboard SATA Controller Configuration www.gigaipc.com... -
Page 73: Digital Io Port Configuration
Enabled : If Digital IO Output value/level is modified in OS, they will be memorized and kept. SOGPO_1 (Pin 1) SOGPI_1 (Pin 2) SOGPO_2 (Pin 3) SOGPI_2 (Pin 4) Configure Digital IO Input or Output values for each pin. SOGPO_3 (Pin 5) SOGPI_3 (Pin 6) SOGPO_4 (Pin 7) SOGPI_4 (Pin 8) www.gigaipc.com... -
Page 74: Tls Auth Configuration
Press [Enter] to configure advanced items : Server CA Configuration : Enroll Cert : 1. Enroll Cert Using File Enroll Cert 2. Cert GUID : Input digit character in 11111111-2222-3333-4444-1234567 890ab format. 3. Commit Changes and Exit 4. Discard Changes and Exit www.gigaipc.com... -
Page 75: Intel(R) Ethernet Controller I226-V - 10:Ff:e0:3B:87:79 (Mac Address May Varied Based On Different Motherboard)
4.3.12 Intel(R) Ethernet Controller I226-V - 10:FF:E0:3B:87:79 (MAC address may varied based on different motherboard) Shows Intel Ethernet controller information www.gigaipc.com... -
Page 76: Intel(R) Ethernet Controller I226-V - 10:Ff:e0:3B:87:7A (Mac Address May Varied Based On Different Motherboard)
4.3.13 Intel(R) Ethernet Controller I226-V - 10:FF:E0:3B:87:7A (MAC address may varied based on different motherboard) Shows Intel Ethernet controller information www.gigaipc.com... -
Page 77: Intel(R) Ethernet Controller I226-V - 10:Ff:e0:3B:87:7B (Mac Address May Varied Based On Different Motherboard)
4.3.14 Intel(R) Ethernet Controller I226-V - 10:FF:E0:3B:87:7B (MAC address may varied based on different motherboard) Shows Intel Ethernet controller information www.gigaipc.com... -
Page 78: Intel(R) Ethernet Controller I226-V - 10:Ff:e0:3B:87:7C (Mac Address May Varied Based On Different Motherboard)
4.3.15 Intel(R) Ethernet Controller I226-V - 10:FF:E0:3B:87:7C (MAC address may varied based on different motherboard) Shows Intel Ethernet controller information www.gigaipc.com... -
Page 79: Intel(R) Ethernet Controller I226-V - 10:Ff:e0:3B:87:7D (Mac Address May Varied Based On Different Motherboard)
4.3.16 Intel(R) Ethernet Controller I226-V - 10:FF:E0:3B:87:7D (MAC address may varied based on different motherboard) Shows Intel Ethernet controller information www.gigaipc.com... -
Page 80: Intel(R) Ethernet Controller I226-V - 10:Ff:e0:3B:87:7E (Mac Address May Varied Based On Different Motherboard)
4.3.17 Intel(R) Ethernet Controller I226-V - 10:FF:E0:3B:87:7E (MAC address may varied based on different motherboard) Shows Intel Ethernet controller information www.gigaipc.com... -
Page 81: Chipset
Power on : System power on when the power is back Loss Power off : Do not power on when the power is back (Default setting) Last state : Restore the system to the state before power loss occures www.gigaipc.com... - Page 82 Enable/Disable Watchdog Timer function Watchdog Timer Enabled : Enables Watchdog Timer function Disabled : Disabled Watchdog Timer function (Default setting) Enable/Disable BIOS Lock function BIOS Lock Enabled : Enables BIOS Lock function (Default setting) Disabled : Disabled BIOS Lock funtion www.gigaipc.com...
-
Page 83: Security
To set up Administrator's password Administrator Minimum length : 3 Password Maximum length : 20 To set up User's password User Password Minimum length : 3 Maximum length : 20 Secure Boot Press <Enter> to configure the advanced items www.gigaipc.com... - Page 84 No : Cancel to restore factory settings Reset To Setup Yes : Agree to setup mode Mode No : Cancel to setup mode Enables expert users to modify Secure boot policy variables without full Key Management authentication Press <Enter> to configure the advanced items www.gigaipc.com...
- Page 85 A u t h o r i z e d S i g n a t u r e Export Copy NVRAM content of Secure Boot database(db) Secure Boot variables to files in a root folder on a variables file system device www.gigaipc.com...
-
Page 86: Boot
Enable/Disable Built-in EFI Shell Built-in EFI Shell Enabled : Enables Built-in EFI Shell Disabled : Disables Built-in EFI Shell (Default setting) Boot Option Shows the information of the storage that be installed in the system priority Choose/set the boot priority www.gigaipc.com... -
Page 87: Save & Exit
Yes : Agree to load optimized defaults No : Cancel to load optimized defaults Enable/Disable Me FW image re-flash function Me FW Image Enabled : Enables Me FW image re-flash function Re-Flash Disabled : Disables Me FW image re-flash function (Default setting) www.gigaipc.com...
Need help?
Do you have a question about the QBiX-Expert Series and is the answer not in the manual?
Questions and answers