Camera Names - Bosch VIPX2 Installation And Operating Manual

EN | 36
– If there are empty lines at the bottom of the table, for example after deletions,
you can add new data by marking the row and selecting values from the list
boxes.
– When you are finished, click the OK button to save and activate the table.
Time server IP address:
Enter the IP address of the time server here.
Time server type:
Choose the protocol used by the selected time server. Always choose SNTP
server as protocol, if it is supported by the time server. This protocol provides
higher accuracy and is required for certain applications, as well as for later add-
ons.
Choose Time server, if the server uses RFC 868 as protocol.

Camera names

The camera name makes it easier to identify the remote camera location, in the
event of an alarm for example. It will be displayed in the video screen if config-
ured to do so (see page 37). The camera name makes the task of administering
cameras in larger video monitoring systems easier, for example using the
VIDOS or Bosch Video Management System programs.
Camera 1: / Camera 2:
Enter a unique, unambiguous name for the camera in this field.
Configuration using a Web browser
Installation and Operating Manual | VIP X2
Bosch Security Systems | 2006-12 | V2.5