Specifications - Bosch VIPX2 Installation And Operating Manual

VIP X2 | Installation and Operating Manual

Specifications

Device
Operating voltage
Power consumption
LAN interface
Data interfaces
Alarm inputs
Relay output
Video inputs
Audio input (Line In)
Audio output (Line Out)
Microphone input
Speaker output
Displays
Operating conditions
Regulatory approvals
Bosch Security Systems | 2006-12 | V2.5
12 ... 24 V DC, power supply unit with various pri-
mary adapters included
Approx. 6 VA
1 × Ethernet 10/100 Base-T,
automatic adjustment,
half/full duplex, RJ45
1 × RS232/RS422/RS485, bidirectional, ST500
1 × USB 2.0
4 × push-in terminals (non-isolated closing con-
tact), maximum trip resistance 10 Ohm
1 × push-in terminal, 30 V
2 × BNC jacks
each 0.7 ... 1.2 V
1 × 3.5 mm stereo jack socket,
5.5 V max., impedance 9 kOhm typ.
p-p
1 × 3.5 mm stereo jack socket,
3 V max., impedance 16 Ohm min.
p-p
1 × push-in terminal, 2.8 V
impedance 2 kOhm typ., supply 2.3 V typ.
1 × push-in terminal, 6 V
impedance 4 Ohm min.
3 × LED (operating voltage, network connection,
data transfer) in rear panel
Temperature: 0 ... +40°C (+32 ... +104°F)
relative humidity: 20 ... 80%,
non-precipitating
CE: IEC 60950; UL 1950; AS/NZS 3548;
EN 55103-1, -2; EN 55130-4; EN 55022;
EN 55024; EN 61000-3-2; EN 61000-3-3;
FCC 47 CFR Chapter 1 Part 15
, 2 A
p-p
, 75 Ohm, PAL/NTSC
p-p
max. at –20 dB,
p-p
max., 1 W rms,
p-p
EN | 135
Appendix