APRILIA eSR2, eSR2 EVO, eSRZ, eSRZ Safe Ride, Tuareg Manual

Safety instructions

Read and follow the instructions carefully before using the item. Keep this manual for future reference or new users.

Take the time to learn the basics of the procedure to avoid severe accidents that may occur in the first few months. Contact your dealer for the proper support on how to use the item correctly or to be directed to an appropriate training organisation.

The company assumes no direct or indirect responsibility arising from misuse of the item, non-compliance with both the highway code and the instructions in the manual, accidents or disputes caused by non-compliance or illegal activity.

This product is to be used for recreational purposes, by one person only and without passengers, therefore it cannot be used by more than one person at a time.

Do not modify the intended use of the vehicle in any way. The item is not suitable for stunts, competitions, transporting objects, towing other vehicles or trailers.

The electric scooter must be used carefully, always respecting the rules imposed by the Highway Code of the country where it is used, in order to avoid dangerous situations and to take the utmost care of yourself and others.

Driving requirements:

Scooter model	eSR2	eSR2 EVO	eSRZ	eSRZ Safe Ride	Tuareg
Product code without indicators	AP-MO-210002	AP-MO-210003	AP-MO-210005	-	-
Product code with indicators included	AP-MO-210006 AP-MO-210008 AP-MO-220004	AP-MO-220006	AP-MO-210007 AP-MO-220003	-	-
Product code with double brake control	-	-	-	AP-MO-220009	AP-MO-220001 AP-MO-220005
MIN weight (Kg)	30	30	30	30	30
MAX weight (Kg)	100	100	100	100	120
MIN age *	14	14	14	14	14
MAX age *	65	65	65	65	65
MIN height (cm)	120	120	120	120	120
MAX height (cm)	200	200	200	200	200

* Before using the product, check and follow local regulations regarding the minimum age of the driver, restrictions on the type of drivers who can use the product and on the use of the product itself.

The A-weighted emission sound pressure level (noise) at the rider's ear is less than 70 dB(A).

Visual representation of the safety warnings

To identify the safety messages in this manual, the following graphic symbols will be used. They draw the focus of attention of the reader/user to the proper, safe use of the item.

Pay attention

Highlights the rules to follow to prevent damage to the item and/or prevent hazardous situations from arising.

Residual risks
Highlights the presence of hazards causing residual risks, which the user must be aware of to prevent injury or damage to property.

General warnings

It is important to bear in mind that when out in a public space or on the road, even when the instructions in the manual are observed down to the letter, the rider is not immune to injury caused by infractions or inappropriate actions taken towards other vehicles, obstacles or persons. Misuse of the item or non-compliance with the instructions provided in this manual may cause severe injury.

This product is an electric vehicle. The faster you ride, the longer the braking distance. Emergency braking on slippery, muddy, wet or icy roads may result in wheel spin and loss of balance. Adequate speeds and safety distances from other vehicles or pedestrians must be adhered to. Take extra care when riding on unfamiliar roads. Do not open the kickstand when using the item, risk of severe personal injury and damage to item.

On wet roads, the braking distance increases and the grip decreases compared to dry roads!

Drive more carefully, keep a safe distance!

For personal safety, wear a helmet, and knee and elbow pads to protect against falls and injuries while riding the item. When allowing others to use the item, ensure that the rider wears the safety equipment and explain the operation of the vehicle. To avoid injury, do not allow other persons to use the item if they do not know how to use it. Wear shoes before using the item.

Children must not play with the scooter or its parts, nor should they be allowed to clean it or perform maintenance operations.

When riding, take special care to not frighten children or pedestrians. When passing behind them, warn them by sounding the horn and slow down using the minimum speed of 6km/h.

Instructions and warnings on rider behaviour

Conditions	Appropriate / intended use	Improper use
Riders	One	More than one person, with children or animals
Safety equipment	Helmet, knee pads, elbow pads, reflective vest	No safety equipment
Pre-riding check	Prior to each use, check brakes and any wear, check tyre pressure (see side of tyre for recommended value), wheel wear, accelerator, indicators, lights and charge status of battery. If any unusual noises or faults are detected, do not use the item and contact your dealer or the Authorised Technical Support Department	Never checking the item prior to use Using the item when noise or faults are present
Walking while pushing the item	Not accelerating Pushing while walking across pedestrian crossings In pedestrian areas when not in pedestrian mode (6 km/h) In overcrowded areas	Press the accelerator Riding the vehicle on pedestrian crossings Riding the vehicle in pedestrian areas when not in pedestrian mode (6 km/h) Riding the vehicle in overcrowded areas
Stationary	The person riding the item must be able to easily place both feet on the ground while holding the handlebars at the correct heigh	Not being able to keep the item stationary and balanced. Sitting on the item while it is running or stationary
Riding under normal conditions	No objects hanging from handlebars	Objects hanging from handlebars result in instability and may impede manoeuvring
	Riding with both hands on handlebars.	One-handed or hand-free riding
	Not using devices such as phones, smartwatches, music players, or headphones	Using devices such as phones, smartwatches, music players, or headphones
	Riding with both feet on the footrest comfortably and safely	Riding with one or both feet outside the footrest It is prohibited to place or amass weight on the rear mudguard.
	Riding with helmet and protective equipment	Riding without helmet and protective equipment
	Riding on easily accessible, smooth and compact roads, avoiding areas with intense traffic or overcrowded areas: e.g. dedicated cycle path, smooth paved surfaces	Riding on motorways, long-distance roads Riding on busy roads Riding on pavements Riding in overcrowded areas Riding on very rough roads Riding near: ravines, escarpments, harbours, sea, lakes or rivers
	Complying with local regulations and the highway code	Failure to comply with regulations and the highway code
	Looking ahead and watching out for obstacles, vehicles or nearby pedestrians	Becoming distracted while riding
	Changing direction, making sure to be seen, moderating speed	Changing direction abruptly at high speed without making sure that you have been seen
	Anticipating the route and moderating speed while observing the highway code and those that are the most vulnerable	Braking and cornering at the same time makes the vehicle unstable
	Using direction indicators, if included on the item	Not using direction indicators
	Slowing down when pedestrians are present	Accelerating or maintaining a constant speed when pedestrians are present
	Using pedestrian mode in pedestrian areas (6 km/h)	Riding without using pedestrian mode in pedestrian areas (6 km/h)
	Warning others of your presence by using the bell	Not warning others of your presence by using the bell
Uneven road conditions: speed bumps/ steps/rough road surfaces	Riding at moderate speeds Bend knees slightly for better shock absorption when traversing uneven surfaces.	High-speed riding Accelerating over bumps or ditches, going down steps, jumping over obstacles, climbing pavements, riding harshly.
Behaviour: around bends, down slopes, in the presence of nearby obstacles, vehicles and pedestrians	Keeping at a safe distance Ceasing to accelerate Braking and slowing down Riding at moderate speed and braking safely Paying attention to doors and other high obstacles	Not observing safety distances Accelerating Riding at high speed, braking suddenly Traversing beneath high obstacles
Visibility conditions	Only ride if there is enough light to ride safely. When riding in unfavourable lighting conditions (from half an hour following sunset, throughout the entire period of darkness and even during the day, if weather conditions preclude road visibility, when driving through tunnels), remember to switch on the item's lights and wear a reflective vest, belts or bands.	Riding in unfavourable lighting conditions with lights off and without using a reflective vest, belts or bands.
Weather conditions	Driving in optimal conditions (no rain)	Driving in adverse conditions: in the rain, in case of snowfall, in the presence of ice or mud on the road, in case of strong wind and fog.
Parking	In designated areas without impeding movement of vehicles or pedestrians On smooth surfaces, ensuring stability is maintained Switching off the item and using an anti-theft device Using the kickstand provided	Everywhere, impeding movement of vehicles or pedestrians On uneven surfaces and without ensuring stability Leaving the item switched on, unattended with no anti-theft device
Engaging in extreme sports/ acrobatics	NO	YES Riding near: ravines, escarpments, harbours, sea, lakes or rivers Riding through puddles Racing with other vehicles
Subjecting the item to forceful impact	NO	YES jumping over object or persons, jumping off steps or from high places

What to do after a fall:
Check that the accelerator lever works properly. To do this, accelerate and decelerate several times.
Check that the brakes work properly. To do this, get off the item, push it forward and brake to ensure it responds to the controls.
Check that all vehicle components are in place and securely fastened.
Check tyre wear and pressure (see side of tyre for recommended value).
Check the wear of the brakes and cables.

The brakes may become hot during use. Do not touch after use.

Package contents and assembly

Assembled item, the handlebar must be installed using the special screws contained in the package.

Method:

• Take the item out of the packaging
• Open the kickstand and check that the item is stable
• Open the handlebar stem and secure it by closing the lever of the closing mechanism
• Connect the display power cable to the main wiring (if necessary)
• Install the handlebar on the stem (do not crush the cables)
• Tighten the screws on the stem using the wrench supplied
• Adjust the steering wheel closing* (if needed)

Steering column stability

eSR2, eSR2 EVO Tuareg
There is a hex screw inside the mechanism.
If the handlebar stem is not very stable after closing, adjust the screw in the mechanism, by tightening or loosening it as required to increase the stability of the stem.

eSRZ, eSRZ Safe Ride
There is a hex screw inside the mechanism.
If the handlebar stem is not very stable after closing, adjust the screw in the mechanism, by tightening or loosening it as required to increase the stability of the stem.

Assemble the item correctly. If, during assembly, any factory defects are detected, certain steps are unclear or issues with assembly or adjustments occur, do not ride the vehicle and contact your dealer or visit www.apriliasmartmovement.it/en/ for technical support.

Do not use accessories and/or additional parts that are not approved by the manufacturer.

Keep children away from plastic items (including packaging materials) and small parts that may result in suffocation.

It is forbidden to modify or transform the item or any its parts in any way, as this may impair efficiency, reduce structural integrity and cause damage. Remove any sharp edges caused by misuse, breakage or damage to the item. If any factory defects, unusual noises or faults are detected, do not ride the vehicle and contact your dealer or visit www.apriliasmartmovement.it/en/ for technical support.

Product overview

In the interest of technological development, the manufacturer reserves the right to modify the item with no prior notice and this manual will not be automatically updated.

For information and to consult the revisions of this manual, visit the website www.apriliasmartmovement.it/en/

eSR2 - eSR2 EVO

1. Display
2. Brake lever
3. Controls of the indicators (if present)
4. Locking catch
5. Footrest
6. Fastening clip
7. Light
8. Traction wheel
9. Rear suspension fork
10. Frame
11. Stand
12. Charging port (opposite side)
13. Free wheel
14. Drum brake
15. Front suspension fork
16. Folding mechanism
17. Headlamp
18. Accelerator

eSRZ

1. Display
2. Fastening clip
3. Brake lever with bell
4. Footrest
5. Locking catch
6. Light
7. Disc brake
8. Free wheel
9. Stand
10. Charging port
11. Traction wheel
12. Frame
13. Folding mechanism
14. Headlamp
15. Accelerator

eSRZ Safe Ride

1. Display
2. Locking catch
3. Brake lever with bell
4. Accelerator
5. Electric brake command
6. Command of the turn signals
7. Turn signal
8. Footrest
9. Steering column locking catch
10. Light
11. Disc brake
12. Free wheel
13. Stand
14. Charging port
15. Traction wheel
16. Frame
17. Folding mechanism
18. Headlamp

Tuareg

1. Display
2. Brake lever
3. Command of the turn signals
4. Locking catch
5. Footrest
6. Steering column fastening clip
7. Light
8. Traction wheel
9. Rear suspension fork
10. Frame
11. Stand
12. Charging port (opposite side)
13. Free wheel
14. Drum brake
15. Front suspension fork
16. Folding mechanism
17. Headlamp
18. Accelerator
19. Turn signal
20. Brake lever

Battery charging

Prior to using the item for the first time, charge to 100%. Ensure the item, charger, and charging port are dry.

Instructions

• Open the kickstand
• Switch off the item

eSR2, eSR2 EVO, Tuareg

Instructions:

• Remove the rubber cover from the charging socket
• First connect the charger to the mains socket and then to the charging port
• When the item is fully charged, the light on the charger changes from red (charging) to green (charging complete)
• After charging, first unplug the charger from the charging port and then from the wall socket
• Close the rubber protection of the charging port

eSRZ, eSRZ, Safe Ride

Instructions:

• Remove the rubber cover from the charging socket
• First connect the charger to the mains socket and then to the charging port.
• When the item is fully charged, the light on the charger changes from red (charging) to green (charging complete).
• After charging, first unplug the charger from the charging port and then from the wall socket.
• Close the rubber protection of the charging port.

To recharge the item, use the battery charger supplied ONLY

Model	Battery charger model	Output voltage	Charging time
eSR2	HLT-180-4201500	42V – 1.5A	5-6 h
eSR2 EVO	HLT-180-5462000	54V – 2.0A	6-7 h
eSRZ	FY0684201500	42V – 1.5A	4-5 h
eSRZ Safe Ride
Tuareg	HLT-180-4202000	42V – 2A	5 h

Using another type of charger may damage the scooter or entail other potential risks.

Never leave the item unsupervised while it is charging. Do not switch the product on while it is charging.

After each use, fully recharge the battery to extend its useful life. Do not recharge the item immediately after use. Allow the scooter to cool for an hour before recharging.

The item should not be charging for extended periods. Overcharging reduces battery life and poses additional potential hazards.

Allow the vehicle to discharge completely to prevent damage to the battery.

Damage caused by the battery being left uncharged for a long period is irreversible and is not covered by the limited warranty. Once the damage has occurred, the battery cannot be recharged (the battery must not be dismantled by unqualified personnel, as this could lead to electric shocks, short circuits or even major safety incidents). If the owner is away, e.g. on holiday, and the device is entrusted to a third party, leave it in a partial charge state (20-50% charge), not fully charged.

Carry out regular visual inspection of the charger and charger cables. If the battery charger cable is clearly damaged, do not use it to avoid further damage and/or risks; please contact us for a replacement.

Battery warnings

The battery consists of lithium-ion cells and chemical elements that are hazardous to health and the environment. Do not use the item if it emits odours, substances or excessive amounts of heat. Do not dispose of the item or the battery with household waste. The end user is responsible for the disposal of electrical and electronic equipment and batteries in compliance with all applicable regulations.

Avoid used, defective and/or non-original batteries of other models or brands.

• Do not leave the battery near fire or heat sources. Fire and explosion hazard.
• Do not open the battery or take it apart. Do not strike, throw, or puncture the battery or attach objects onto it.
• Do not touch any substances leaking from the battery, as they are deemed hazardous. Do not allow children or pets to touch the battery.
• Do not overcharge or short-circuit the battery. Fire and explosion hazard.
• Do not immerse or expose the battery to water, rain or other liquids. Do not expose the battery to direct sunlight, excessive heat or cold (for example, do not leave the item or battery in a car in direct sunlight for extended periods of time), or environments containing explosive gases or flames.
• Do not carry or store the battery with metal objects such as hairpins, necklaces, etc. Contact between metal objects and battery contacts may cause a short circuit resulting in physical injury or death.

Command information / Control panel

eSR2 / eSR2 EVO / Tuareg

Throttle (A): press down to accelerate.

Power button (B): Press to switch the item on/off.

Brake lever (C): pull the lever to brake

Speed level change: press the button (B) once to select the desired level.

Quickly press 3 times in a row to switch from Km/h to Mph.

Quickly press 4 times in a row to switch from ODO to TRIP.

Lights: press the button (B) twice to switch them on/off.

Bell: press button (D) once to activate it.

eSRZ / eSRZ Safe Ride

Throttle (A): press down to accelerate.

ON button (B): press for 2 seconds to turn on or off the item.

Brake lever / command (C): pull or push down to brake.

Speed level change: press the button (B) twice to select the desired level.

Lights: press the button (B) once to switch them on/off.

ODO/Trip: press button (B) 3 times to switch mode

Km/h-Mph: press button (B) 4 times to switch mode

Symbols

eSR2 eSR2 EVO Tuareg

Zero Start function:
The accelerator is activated once the speed of travel exceeds 3 km/h.

Symbols

1. Battery Level: The battery level is indicated by 4 bars.
2. Speedometer: Displays the current speed of the scooter.
3. ODO: Total distance travelled.
4. TRIP: Single trip distance.
5. Lights indicator light.
6. Level 1 - The display shows 1
7. Level 2 - The display shows 2
8. Level 3 - The display shows 3
9. Cruise Control: Speed control. It is activated after the same speed has been maintained for a few seconds.
   The display emits a short beep.
10. Service light: indicates that maintenance is required by the assistance service
11. Bluetooth light: always on

eSRZ, eSRZ, Safe Ride

Zero Start function:
The accelerator is activated once the speed of travel exceeds 3 km/h.

1. Battery Level: The battery level is indicated by 4 bars.
2. Speedometer: Displays the current speed of the scooter.
3. ODO: Total distance travelled.
4. TRIP: Single trip distance.
5. Lights indicator light.
6. Level 1 – The display will show the pedestrian symbol.
7. Level 2 - The display will show ECO.
8. Level 3 - The display will show D.
9. Level 4 - The display will show S.
10. Cruise Control: Speed control. It is activated after the same speed has been maintained for a few seconds. The display emits a short beep.
11. Unit of measurement of speed: km/h-Mph

Direction indicators (if present)

eSR2 eSR2 EVO Tuareg (left side of handlebars)

On models where they are fitted, the direction indicators are placed at the ends of the handlebars (left and right side).

The direction indicators are required to provide early warning of any change in direction while riding.

Before each use of the product, check the correct operation of the direction indicators.

eSRZ (handlebar right side), eSRZ, Safe Ride (handlebar left side)

Drive:

On models where they are fitted, the direction indicators are placed at the ends of the handlebars (left and right side).

The direction indicators are required to provide early warning of any change in direction while riding.

Before each use of the product, check the correct operation of the direction indicators.

Quick guide

• Prior to using the item for the first time, charge to 100%.
• Check tyre pressure (see side of tyre for recommended value). If the item does not reach at least 60% of the declared kms, or the maximum speed within the first 3 months of use, it is likely that the wheels have deflated once more. In this case, restore pressure as indicated.
• Check and adjust the brakes.
• Turn on the display.
• Place the product on a flat surface.
• Hold the handlebar firmly with both hands. Step onto the footrest with one foot and use the other to give yourself a gentle push and accelerate.

Zero Start Function: the throttle is activated once the forward speed exceeds 3 km/h.
For safety reasons, the item is initially set up to avoid standing starts.

• When riding the item, tilt body in the riding direction during a turn and slowly turn the handlebars.
• To stop the item, release the accelerator, pull the brake lever
• To get off, first stop the item completely. Getting off the moving item can cause injury.
• Prior to each use, check brakes and any wear, check tyre pressure (see side of tyre for recommended value), wheel wear, accelerator and charge status of battery.

Brake lever position

eSR2 / eSR2 EVO / Tuareg

It is possible to adjust the position of the brake lever, if necessary, by unscrewing the screw (A). Once the position has been adjusted, tighten the screw (A).

eSRZ / eSRZ Safe Ride (opposite side)

The brake lever can be adjusted when needed by unscrewing the screw located underneath (A).
Once the position has been adjusted, tighten the screw (A).

Brake adjustment

eSR2 / eSR2 EVO / Tuareg

If the brake is too tight or too loose, adjust it by loosening or tightening the screw (A).
If the brake lever is too soft or too hard even after following the instructions in the first step, it may be necessary to repeat the operation until the optimal setting has been reached.

eSRZ

If the brake is too tight or too loose, use the Allen wrench to loosen the screw (A), then adjust the brake cable, (shorten the brake cable at the top if it is too tight; if it is too loose, pull the brake cable downwards) and then, re-tighten the screw (A).
Check the correct alignment between the brake caliper and the disc. Use the screws (B) and (C) to adjust the position / alignment on the disc, if necessary.

Folding and carrying

Make sure the electric scooter is turned off. Hold the handlebar stem with your hand, pull the lever, fold the stem towards the footrest and fasten it.

eSR2 / eSR2 EVO / Tuareg

eSRZ / eSRZ Safe Ride

After folding, lift it by holding the handlebar stem with one or both hands.

Make sure to secure the item during transportation. If the item cannot be lifted, do not transport with the item raised. If dropped, the item may cause severe injury and damage.

Range and performance

The maximum range and performance of the vehicle depends on a number of variables:

Terrain: riding on smooth roads provides greater range and performance than riding on rough roads and climbs.

Weight of user: the greater the weight, the lower the range and performance of the vehicle.

Temperature: riding the scooter in very cold or hot conditions affects range and performance.

Speed and riding style: riding smoothly and at constant speed extends the autonomy. Continuous acceleration, deceleration and manoeuvring greatly reduce the range. A lower speed extends the range.

Maintenance: prompt recharging, proper maintenance and regular checking of tyre pressure (see reference value in "Technical data sheet" section) increase range and ensure consistent performance over time.

The level of battery charge affects performance – the lower the level, the lower the speed, especially on climbs.

Storage, maintenance and cleaning

If there are stains on the body of the scooter, wipe with a damp cloth. If the stains persist, apply neutral soap, brush out with a toothbrush, then wipe with a damp cloth. If there are scratches on the plastic components, use sandpaper or other abrasive material to remove them. Do not clean the items with alcohol, petrol, paraffin or other corrosive or volatile chemical solvents to prevent severe damage. Do not wash the item using high-pressure water jets. When cleaning the scooter, make sure that it is switched off, that the charging cable is disconnected, and the rubber cap is closed, as a water leak may cause an electric shock or other serious problems. Water seeping into the battery may cause damage to internal circuits and risk of fire or explosion. Should you suspect that water may have entered the battery, stop using the battery immediately and return it to your dealer's after-sales service for checking.

When the item is not in use, store it indoors in a cool, dry place. Do not store outdoors or inside cars for extended periods of time. Excessive sunlight, overheating, and excessive cold accelerate tyre ageing and jeopardize the life of both the item and the battery. Do not expose it to rain or water or immerse it in water to wash it.

Regularly check the tightness of the bolted parts, in particular wheel axles, the folding and transportation system, the steering system, the braking system, the state of the frame, the forks and the suspension. Nuts and all other self-locking fasteners may lose their effectiveness. Periodically check and tighten these components.

Like all mechanical components, the item is subject to wear and tear. Different materials and components may react to wear or stress fatigue in a variety of ways. If the service life of a component is exceeded, it may break suddenly, resulting in injury to the rider. Any cracks, scratches or changes in colour in areas subject to high levels of stress indicate that the life of the component has been reached and must be replaced.

Check the condition of the tyres: there must be no cuts, cracks, foreign bodies, abnormal swelling, missing parts or other damage. For tyre pressure, refer to the value indicated in "Technical data sheet" section in this instruction manual.

Do not attempt to disassemble or repair the scooter yourself. Replacement of all scooter components should be carried out by the technical service department. For further information, contact your dealer or visit www.apriliasmartmovement.it/en/

App configuration

This item can be used with the Aprilia Smart Movement App. The App allows you to control the item directly from your Smartphone.

Scan the QR CODE to download and install the App. If the App is not found, search for it on your reference App store.

The items with Bluetooth that can be paired with the Aprilia Smart Movement App are the following: Aprilia eSR2, Aprilia eSR2 EVO, Tuareg.

This item can be used with the Aprilia Smart Movement App.

The App allows you to control the item directly from your Smartphone.

Open the App and follow the instructions given.

The App may require various permissions required for the use and operation of the App itself.

The App version may have been updated by your App store. It is advisable to constantly check whether any updates are available for the App in order to be able to use the new features and always install the latest version of the App on your device.

Do not use your device while riding.

Technical data sheet

General information	eSR2		eSR2 EVO
Frame	Aluminium alloy
Sunspensions	front and rear
Speed	Product code: AP-MO-210002 AP-MO-210006 AP-MO-210008	Product code: AP-MO-220004	Product code: AP-MO-210003 AP-MO-220006
	L1: ≤ 6km/h L2: ≤ 20km/h L3: ≤ 25km/h (max speed)*	L1: ≤ 6km/h L2: ≤ 15km/h L3: ≤ 20km/h (max speed)*	L1: ≤ 6km/h L2: ≤ 15km/h L3: ≤ 20km/h (max speed)*
Maximum slope**	23%		24%
Brakes	Front drum brake and rear electric brake		Front drum brake and rear electric brake
Tyres	10" with air chamber Recommended pressure: 36 psi / 2.5 bar		10" with air chamber Recommended pressure: 36 psi / 2.5 bar
Maximum load	120 kg		100 kg
Rider	Check the current legislation in your country
Operating temperature	-5°C/ 45°C		-5°C/ 45°C
Protection level	IPX4		IPX4
Charging time	approx 5/6 hours		approx 6/7 hours
Autonomy**	up to 25km		up to 35km
Electrical system
Rated power of motor	0.35kW; 350W Brushless, 19.6Nm		500W; 0.5kW Brushless, 22.9Nm
Maximum power of motor	0.55kW; 550W		0.85kW; 850W
Display	built-in colour LED		built-in colour LED
Battery	36V 8Ah 288Wh		48V 14.4Ah 691Wh
Low voltage protection	31V		38V
Current limit	17A
KERS	yes		yes
Lights	Front and rear LEDs		Front and rear LEDs
Features	Bluetooth with App
Dimensions and weight
Net weight	17 kg		18.5 kg
Gross weight	20 kg		21 kg

* Always respect the highway code and the regulations in force in the country where the electric scooter is used.
** Subject to variations based on the rider's weight, on the road conditions and on the temperature.

General information	eSRZ		eSRZ Safe Ride
Frame	steel and aluminium		steel and aluminium
Sunspensions	no		no
Speed	Product code: AP-MO-210005 AP-MO-210007	AP-MO-220003	Product code: AP-MO-220009
	L1: ≤ 6km/h L2: ≤ 15km/h L3: ≤ 20km/h L4: ≤ 25km/h (max speed)*	L1: ≤ 6km/h L2: ≤ 10km/h L3: ≤ 15km/h L4: ≤ 20km/h (max speed)*	L1: ≤ 6km/h L2: ≤ 15km/h L3: ≤ 20km/h L4: ≤ 25km/h (max speed)*
Maximum slope**	21%		21%
Brakes	Front electric brake and rear disc brake		Front electric brake and rear disc brake
Tyres	8.5" with front and rear inner tube Pressure: 50 psi / 3.4 bar		8.5" with front and rear inner tube Pressure: 50 psi / 3.4 bar
Maximum load	100 kg		100 kg
Rider	Check the current legislation in your country
Operating temperature	-5°C/ 45°C		-5°C/ 45°C
Protection level	IPX5		IPX5
Charging time	approx. 4 hours		Approx. 4 hours
Autonomy**	Up to 20km		Up to 20km
Electrical system
Rated power of motor	0.3kW; 300W Brushless		0.3kW; 300W Brushless
Maximum power of motor	0.45kW; 450W		0.45kW; 450W
Display	built-in colour LED		LED
Battery	36V 6Ah 216Wh		36V 6Ah 216Wh
Low voltage protection	31V ± 0.5V		31V ± 0.5V
Current limit	16A		16A
KERS	yes		yes
Lights	Front and rear LEDs		Front and rear LEDs
Features	-		-
Dimensions and weight
Net weight	13.8 kg		14 kg
Gross weight	16.9 kg		17.1 kg

* Always respect the highway code and the regulations in force in the country where the electric scooter is used.
** Subject to variations based on the rider's weight, on the road conditions and on the temperature.

General information	Tuareg
Frame	aluminium alloy
Sunspensions	front and rear
Speed	Product code: AP-MO-220001 L1: ≤ 6km/h L2: ≤ 20km/h L3: ≤ 25km/h (max speed)*	Product code: AP-MO-220005 L1: ≤ 6km/h L2: ≤ 15km/h L3: ≤ 20km/h (max speed)*
Maximum slope**	14%
Brakes	Front drum brake and rear electric brake
Tyres	10" off-road with front and rear inner tubes Pressure: 50 psi / 3.4 bar
Maximum load	120 kg
Rider	Check the current legislation in your country
Operating temperature	-5°C/ 45°C
Protection level	IPX5
Charging time	approx. 5 hours
Autonomy**	Up to 35km
Electrical system
Rated power of motor	0.35kW; 350W Brushless, 19.6Nm
Maximum power of motor	0.55kW; 550W
Display	built-in colour LED
Battery	36V 10.4Ah 374Wh
Low voltage protection	31V ± 1V
Current limit	17A
KERS	yes
Lights	Front and rear LEDs
Features	Bluetooth with App
Dimensions and weight
Net weight	18 kg
Gross weight	21 kg

* Always respect the highway code and the regulations in force in the country where the electric scooter is used.
** Subject to variations based on the rider's weight, on the road conditions and on the temperature.

Troubleshooting

Error	Cause	Solution
The motor is not running	Electrical issue, error code present	Request technical assistance
The drive wheel does not turn	Problems with the brakes Motor is blocked	Adjust the brakes; if the problem persists, request technical assistance Check that the wheel is properly tightened, check that the wheel turns without starting the vehicle. If the problem persists, request technical assistance
The motor stops while it is running	Motor overheating Presence of error code	Stop the vehicle and wait for it to cool Request technical assistance
After charging it, the item does not switch on or it switches off after a few km	Damaged battery	Request technical assistance
The battery does not charge or the item does not switch on	Connection problems The battery is not connected (models with removable battery) The battery is depleted Damaged battery Problems with the battery charger	Request technical assistance Check that the power connector is connected. Charge the battery to 100% Request technical assistance Replace the battery charger

Error code table

eSR2 / eSR2 EVO / Tuareg

Error Code eSR2 / eSR2 EVO / Tuareg		Indications		Solution
E01		Engine malfunction		Request technical assistance
E02		Control unit MOS malfunction		Request technical assistance
E03		Brake lever sensor malfunction		Request technical assistance
E04		Throttle malfunction		Request technical assistance
E05		Low voltage protection		Recharge the battery; if the problem persists, request technical assistance
E06		Control unit signal error		Request technical assistance
E07		Protection from overvoltage		Switch off the vehicle, wait a few minutes before restarting it if resetting occurs
E08		Controller OP malfunction		Request technical assistance

eSRZ / eSRZ Safe Ride

Error Code eSRZ / eSRZ Safe Ride	Indications		Solution
E01	Throttle malfunction		Request technical assistance
E02	Brake lever sensor malfunction		Request technical assistance
E03	Engine malfunction		Request technical assistance
E04	Communication error		Request technical assistance
E05	Overtemperature error		Request technical assistance
E06	Control unit error		Request technical assistance
E07	Phase / current error		Request technical assistance
E08	Battery voltage error		Recharge the battery; if the problem persists, request technical assistance

Documents / Resources

References

• App Store - Apple
• Google Play

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download APRILIA eSR2, eSR2 EVO, eSRZ, eSRZ Safe Ride, Tuareg Manual