Installing From The Compaq Management Cd - Compaq 204451-002 - UPS T2200 XR Reference Manual

2-6 Compaq Power Products Software Reference Guide

Installing from the Compaq Management CD

To install the Compaq UPS Management Agent on a network server using the
Compaq Management CD:
1. Insert the Compaq Management software CD into the CD-ROM drive of
the network server.
2. Run the installation program for your operating system as follows. Enter
these commands from the command line prompt.
G
Windows NT 4.0 and Windows 2000
From the Autorun menu, select Other Applications, Compaq
Power Management Server Agent for Windows NT, then Install.
G
NetWare
load <CDROM drive letter>:\cpqcpm\agents\netware\eng\cpmsetup.nlm
G
OS/2
<CD drive letter>:Mgmt<version #>\cpqcpm\Agents\OS2\Eng\install.exe
G
SCO 5
a. mount^–r^–f^HS^–o^lower^/dev/cd0^/mnt
b. sh^/mnt/cpqcpm/agents/sco/eng/install.sh
NOTE: Commands are case sensitive.
G
UNIXWare
a. mount^-r^-F^cdfs^-o^noextend^/dev/cdrom/cdrom1^/mnt
b. sh^/mnt/cpqcpm/agents/unixware/eng/install.sh
NOTE: Commands are case sensitive.