Installing from the Compaq Power Management
Software CD
The Compaq Power Management software CD is provided with every Compaq
UPS. To install the Console using this CD:
1. Insert the CD into the CD-ROM drive of the workstation on which CIM
is installed.
2. Click Start, and then select Run.
3. Type the following command:
4. Follow the system prompts.
There are two methods available to perform the installation:
I
Specify the drive and directory name (or create a new directory) on
which to install the Console.
I
Install the Console on the default drive and directory
(C:\WINNT\CPQCPM).
Installing from the Compaq Management CD
The Compaq Management CD is provided with your Compaq server. To
install the Console into Compaq Insight Manager using this CD:
I
CIM 4.90 and earlier:
1. Insert the Compaq Management CD into the CD-ROM drive of the
workstation on which Compaq Insight Manager is installed.
2. Go to the Autorun menu, click Other Applications, Compaq Power
Management Client Software, then Install.
I
CIM 5.0 and above:
1. Insert the Compaq Management CD into the CD-ROM drive of the
workstation on which Compaq Insight Manager is installed.
2. Go to the Autorun menu, click Power Management Agents, then
select the appropriate component.
<CD DRIVE LETTER>:\INSIGHT\ENG\SETUP.EXE
Installation 2-3