Table of Contents
Advertisement
Quick Links
I
C
OTA
OMM
User Guide
Document Type:
Document Number:
Document Issue:
Document Status:
Product Name:
Product Code:
Issue Date:
PROPRIETARY:
The information contained in this document is the property of TEKTELIC Communications Inc. Except as specifically
authorized in writing by TEKTELIC, the holder of this document shall keep all information contained herein
confidential, and shall protect the same in whole or in part from disclosure to all third parties.
© 2023
TEKTELIC Communications Inc., all rights reserved.
All products, names, and services are trademarks and registered trademarks of their respective companies.
TEKTELIC Communications Inc.
th
7657 10
Street NE
Calgary, AB, Canada T2E 8X2
Phone: (403) 338-6900
D
-B
UAL
AND
User Guide
T0008765_UG
1.1
RELEASED
IotaComm Dual-Band Gateway
T0007754, T0007752
Aug 10, 2023
G
ATEWAY
Advertisement
Table of Contents
Related Manuals for TEKTELIC Communications T0007754
Summary of Contents for TEKTELIC Communications T0007754
- Page 1 Aug 10, 2023 PROPRIETARY: The information contained in this document is the property of TEKTELIC Communications Inc. Except as specifically authorized in writing by TEKTELIC, the holder of this document shall keep all information contained herein confidential, and shall protect the same in whole or in part from disclosure to all third parties.
-
Page 2: Document Revision
A. Sun Create draft based on Mega User Guide Aug 9, 2023 Released A. Sun Released after review Aug 10, 2023 Released A. Sun Removed confidentiality marking IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 2 of 20... -
Page 3: Table Of Contents
Ground Cable Installation ....................15 Direct DC Power Cable Installation ................16 RF Cable Installation ....................... 17 Copper Ethernet Cable Installation ................17 Radio Compliance Statements ....................18 IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 3 of 20... -
Page 4: List Of Tables
List of Tables Table 1: IotaComm Dual-Band Gateway Models ................6 Table 2: IotaComm Dual-Band Gateway Interface Connector Types ........... 10 Table 3: IotaComm Dual-Band Gateway Specifications ............... 11 IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 4 of 20... - Page 5 Figure 4: Kona Module with Mounting Bracket ................14 Figure 5: Chassis Ground Connection ................... 16 Figure 6: Direct DC Power CPC Connector Connection Polarity ........... 17 IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 5 of 20...
-
Page 6: Product Description
Eth. Ant. IOTA 64 Module, 2x T0007754 US915 + IOTA Band LoRa, OPTION #3 IOTA 64 Module, 2x T0007752 US915 + IOTA Band LoRa, 3G/4G, OPTION #4 IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 6 of 20... -
Page 7: Figure 1: Iotacomm Dual-Band Gateway Common Dimensions
Figure 1 illustrates the common Gateway external form-factor. The differences between the options are limited to the bulkhead field. Figure 1: IotaComm Dual-Band Gateway Common Dimensions IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 7 of 20... -
Page 8: Bulkhead Layout
IOTA RF LoRa RF Enclosure DC Power Antenna Antenna 1 Antenna 0 Vent AntennaOp Protective Copper Earth Ground Ethernet Figure 2: IotaComm Dual-Band Gateway Option #3 Bulkhead Field IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 8 of 20... -
Page 9: Figure 3: Iotacomm Dual-Band Gateway Option #4 Bulkhead Field
Connector types and their mating connectors are listed in Table 2. IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 9 of 20... -
Page 10: Specifications
1/4 - 20 UNC double Earth Ground Industry standard 2-hole lug, 1/4 x 0.75” spacing hole 1.3 Specifications The IotaComm Dual-Band Gateway specifications are listed in Table 3. IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 10 of 20... - Page 11 All interfaces are protected to primary levels except for the 3G/4G modem Surge Protection antenna port which supports local antenna mounting only or requires an external surge suppressor. IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 11 of 20...
-
Page 12: Installation
• The IotaComm Dual-Band Gateway does not contain a power supply disconnection device; a readily accessible disconnection device must be incorporated external to the IotaComm Dual-Band Gateway. IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 12 of 20... -
Page 13: Unpacking And Inspection
6. Appropriately sized pipe clamps for pole mounting or appropriate screws or bolts (four sized M8) with any required anchors according to the wall construction for wall mounting. IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 13 of 20... -
Page 14: Iotacomm Dual-Band Gateway Mounting
Figure 4: Kona Module with Mounting Bracket The IotaComm Dual-Band Gateway wall mounting procedure is as follows: 1. Bolt the wall mounting bracket to the Gateway module using the supplied bolts and washers. IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 14 of 20... -
Page 15: Ground Cable Installation
4. Install the ground cable through its 2-hole lug onto the chassis ground point using the two supplied 1/4 - 20 x 1/2” bolts with flat and star lock washers, torqued to 10.4 Nm (92 in·lbs). IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 15 of 20... -
Page 16: Direct Dc Power Cable Installation
The DC power cable shall be rated for outdoor application and in accordance with local and national electrical codes. The CPC DC connector shall be as specified in Table 2 and shall follow the signal polarity identified in Figure 6. IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 16 of 20... -
Page 17: Rf Cable Installation
Table 2 must be used. The Ethernet cable must have minimum 24 AWG conductors and shall be rated for outdoor application according to local and national electrical codes. IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 17 of 20... -
Page 18: Radio Compliance Statements
FCC radio frequency exposure limits, this equipment should be installed and operated with minimum distance 96 cm (38 inches) between the antenna and your body during normal operation. Users must follow the specific operating instructions for satisfying RF exposure compliance. IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 18 of 20... - Page 19 équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Approved Antenna Types: IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 19 of 20...
- Page 20 : Technology Band Frequency (MHz) Gain maximum d'antenne (dBi) 1850–1910 1710–1755 824–849 777–787 704–716 1850–1915 1850–1910 UMTS 1710–1755 824–849 824–849 1900 1850–1910 824–849 CDMA 1850–1910 BC10 817–824 IotaComm Dual-Band GW T0008765_UG Version 1.1 TEKTELIC Communications Inc. Page 20 of 20...
Need help?
Do you have a question about the T0007754 and is the answer not in the manual?
Questions and answers