Table of Contents
Advertisement
Available languages
Available languages
Quick Links
TEKTELIC C
Document type:
Document number:
Document version:
Document Status:
Product name:
Product codes:
TEKTELIC Communications Inc.
th
7657 10
Street NE
Calgary, AB, Canada T2E 8X2
Phone: (403) 338-6900
© 2016 TEKTELIC Communications Inc., All rights reserved.
All products, names and services are trademarks and registered trademarks of their respective companies.
Disclaimer:
Material contained in this document is subject to change without notice. The material herein is solely for
information purposes and does not represent a commitment by TEKTELIC or its representatives. TEKTELIC has
prepared the information contained in this document solely for use by its employees, agents, and customers.
Dissemination of this information and/or concepts to other parties is prohibited without the prior written consent
of TEKTELIC. In no event will TEKTELIC be liable for any incidental or consequential damage in connection with the
furnishing, performance or use of this material.
TEKTELIC reserves the right to revise this publication in accordance with formal change control procedures defined
by TEKTELIC.
OMMUNICATIONS
User Guide
T0004279_UG
2.8
Approved
Kona Macro Gateway
T0004142, T0004470, T0004250, T0004251,
T0004252, T0004537
I
.
NC
Advertisement
Table of Contents
Related Manuals for TEKTELIC Communications T0004142
Summary of Contents for TEKTELIC Communications T0004142
- Page 1 Street NE Calgary, AB, Canada T2E 8X2 Phone: (403) 338-6900 © 2016 TEKTELIC Communications Inc., All rights reserved. All products, names and services are trademarks and registered trademarks of their respective companies. Disclaimer: Material contained in this document is subject to change without notice. The material herein is solely for information purposes and does not represent a commitment by TEKTELIC or its representatives.
- Page 2 Added 10A maximum DC input rating Mar. 08, 2017 Approved S. Morrison Added language translation & LoRa antenna type Mar. 24, 2017 Approved T. Danshin Added MPE information Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 2 of 34...
-
Page 3: Table Of Contents
Matériel requis pour l'installation .................. 27 Montage Kona Macro Gateway ..................28 Installation du câble de masse ..................29 Installation du câble d'alimentation CC direct ............... 30 Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 3 of 34... - Page 4 Installation du câble Ethernet en cuivre ................ 31 Mise en service et surveillance ....................33 Équipement requis ......................33 Procédure ........................33 Déclarations de conformité à la radio ................... 34 Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 4 of 34...
-
Page 5: Product Description
Figure 1 illustrates the common Gateway external form-factor; the differences between the various models are limited to the connector bulkhead layout. Figure 2 illustrates the bulkhead layouts for the Kona Gateway models. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 5 of 34... - Page 6 Figure 1: Kona Macro Gateway Common Dimensions Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 6 of 34...
-
Page 7: Connectors
The DC power connector is replaced by a hybrid DC power/Fiber connector on models which support fiber backhaul capability as with the T0004252 model detailed in Figure 4. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 7 of 34... - Page 8 Antenna 2 pin CPC Antenna 1 Antenna 0 Vent Protective Copper 3G/4G Earth Ethernet Modem Ground Antenna Figure 3: Kona Macro Gateway T0004250 Connector Field Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 8 of 34...
- Page 9 Threaded, circular, RJ-45 approved mating connector (p/n 33000111-02 or equivalent) 0 or 1 Direct DC Power Input Threaded, circular, 2 Shenzhen Chogori Technology Co., Ltd. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 9 of 34...
-
Page 10: Specifications
All interfaces are protected to primary levels except for the 3G/4G modem antenna port which supports local antenna mounting only or requires Surge Protection external surge suppressor. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 10 of 34... -
Page 11: Installation
10 A. The overcurrent protection must have the appropriate current interrupt capacity for the power source and must be incorporated into the non-earthed conductor(s) of the Kona Macro Gateway DC supply. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 11 of 34... -
Page 12: Unpacking And Inspection
(four M6x1.0 - 14 mm bolts with flat and star lock washers) as illustrated in Figure 5. The Gateway module must be oriented with the connector bulkhead facing down, towards earth. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 12 of 34... - Page 13 4. Insert and tighten two additional site supplied M8 bolts through the holes at the bottom of the bracket. The Kona Macro Gateway pole mounting procedure is as follows: Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 13 of 34...
-
Page 14: Ground Cable Installation
1/4 - 20 x 1/2” bolts with flat and star lock washers, torqued to 10.4 Nm (92 in·lbs). Figure 6: Chassis Ground Connection Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 14 of 34... -
Page 15: Direct Dc Power Cable Installation
Figure 8. Although this connector supports a third wire for a ground connection, this ground is supplementary and does not replace the principle ground wire terminated at the two-hole lug chassis ground point. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 15 of 34... -
Page 16: Rf Cable Installation
Table 2 must be used. The Ethernet cable must have minimum 24 AWG conductors and shall be rated for outdoor application according to local and national electrical codes. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 16 of 34... -
Page 17: Commissioning And Monitoring
IP address using your local DHCP tools. 4. Install the Tektelic Kona Factory Test Tool on a PC and follow the operating instructions as detailed in the reference document T0004142_GUI_Instructions. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 17 of 34... -
Page 18: Radio Compliance Statements
Before servicing the product, the antenna(s) or cables, turn off the transmission function or the unit power if you have to get closer than the minimum separation distance.. The 3G/4G modem antenna maximum allowed gain including cable loss shall be in accordance with the following table: Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 18 of 34... - Page 19 Frequency Technology Band Antenna Gain (MHz) (dBi) 1850–1910 1710–1755 824–849 777–787 704–716 1850–1915 UMTS 1850–1910 1710–1755 824–849 824–849 1900 1850–1910 CDMA 824–849 1850–1910 BC10 817–824 Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 19 of 34...
-
Page 20: Description Du Produit
à la disposition de la cloison de raccordement. La figure illustre les dispositions de la cloison pour les modèles Kona Gateway. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 20 of 34... - Page 21 Kona Macro Gateway Dimensions Communes Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 21 of 34...
-
Page 22: Connecteurs
CC est remplacé par un connecteur de puissance / fibre DC hybride sur des modèles qui prennent en charge la capacité de rétroaction de fibre comme avec le modèle T0004252 décrit en détail à la figure. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 22 of 34... - Page 23 Enclosure Antenna 2 pin CPC Antenna 1 Antenna 0 Évacuation Ethernet 3G/4G Terre de Cuivre Modem protection Antenna Kona Macro Gateway T0004250 Champ du connecteur Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 23 of 34...
- Page 24 (p/n 33000111-02 or equivalent) Direct DC Power Input Shenzhen Chogori Technology Co., Ltd. 0 or 1 Fileté, circulaire, 2 Port approved mating connector (p/n Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 24 of 34...
-
Page 25: Caractéristiques
Protection contre les port d'antenne du modem 3G / 4G qui prend en charge uniquement le surtensions montage de l'antenne locale ou nécessite un coupe-circuit externe. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 25 of 34... -
Page 26: Installation
• La passerelle Macro Kona ne contient pas de dispositif de déconnexion de l'alimentation; Un dispositif de déconnexion facilement accessible doit être incorporé en externe à la passerelle Kona Macro. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 26 of 34... -
Page 27: Déballage Et Inspection
Colliers de montage de taille appropriée pour le montage de poteau ou des vis ou boulons appropriés (quatre dimensions M8) avec tous les ancres requis selon la construction de mur pour le montage mural. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 27 of 34... -
Page 28: Montage Kona Macro Gateway
Installez 2 boulons M8 fournis dans le mur à un espacement de 139,7 mm, laissant les têtes audacieuses faisant saillie avec un écart de 2 mm de la surface du mur. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 28 of 34... -
Page 29: Installation Du Câble De Masse
• Installez le câble de masse à travers son ergot à 2 trous sur la borne de mise à la terre du châssis en utilisant les deux boulons fournis 1/4 - 20 x 1/2"avec rondelles plates et étoile, serré à 10,4 Nm. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 29 of 34... -
Page 30: Installation Du Câble D'alimentation Cc Direct
Le connecteur CC continu du CPC doit être conforme au tableau et doit suivre la polarité du signal indiquée à la figure. Noir DC négatif Keyed DC Power Blanc Connector (CPC) DC Positif DC Positif DC négatif Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 30 of 34... -
Page 31: Installation Du Câble Rf
être installé. Lorsque le port est en permanence un connecteur pour le backhaul, un connecteur approprié étanche à l'eau spécifié dans le tableau doit être utilisé. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 31 of 34... - Page 32 Le câble Ethernet doit avoir un minimum de conducteurs 24 AWG et doit être évalué pour une utilisation en extérieur conformément aux codes électriques locaux et nationaux. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 32 of 34...
-
Page 33: Mise En Service Et Surveillance
MAC de la passerelle sur le boîtier, déterminez l'adresse IP à l'aide de vos outils DHCP locaux. • Installez l'outil de test Tektelic Kona Factory sur un PC et suivez les instructions d'utilisation détaillées dans le document de référence T0004142_GUI_Instructions. Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 33 of 34... -
Page 34: Déclarations De Conformité À La Radio
Frequency maximum Technology Band (MHz) d'antenne (dBi) 1850–1910 1710–1755 824–849 777–787 704–716 1850–1915 UMTS 1850–1910 1710–1755 824–849 824–849 1900 1850–1910 CDMA 824–849 1850–1910 BC10 817–824 Kona Macro User Guide T0004279_UG Version 1.1 TEKTELIC Communications Inc. Confidential Page 34 of 34...
Need help?
Do you have a question about the T0004142 and is the answer not in the manual?
Questions and answers