TEKTELIC Communications Kona Micro Gateway Series User Manual

Table of Contents

Advertisement

Available languages

Available languages

TEKTELIC C
Document type:
Document number:
Document version:
Document Status:
Product name:
Product codes:
TEKTELIC Communications Inc.
th
7657 10
Street NE
Calgary, AB, Canada T2E 8X2
Phone: (403) 338-6900
© 2019 TEKTELIC Communications Inc., All rights reserved.
All products, names and services are trademarks and registered trademarks of their respective companies.
Disclaimer:
Material contained in this document is subject to change without notice. The material herein is solely for
information purposes and does not represent a commitment by TEKTELIC or its representatives. TEKTELIC has
prepared the information contained in this document solely for use by its employees, agents, and customers.
Dissemination of this information and/or concepts to other parties is prohibited without the prior written consent
of TEKTELIC. In no event will TEKTELIC be liable for any incidental or consequential damage in connection with the
furnishing, performance or use of this material.
TEKTELIC reserves the right to revise this publication in accordance with formal change control procedures defined
by TEKTELIC.
OMMUNICATIONS
User Guide
T0005281_UG
1.2
Approved
Kona Micro Gateway
See Table 1
I
.
NC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Kona Micro Gateway Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for TEKTELIC Communications Kona Micro Gateway Series

  • Page 1 Street NE Calgary, AB, Canada T2E 8X2 Phone: (403) 338-6900 © 2019 TEKTELIC Communications Inc., All rights reserved. All products, names and services are trademarks and registered trademarks of their respective companies. Disclaimer: Material contained in this document is subject to change without notice. The material herein is solely for information purposes and does not represent a commitment by TEKTELIC or its representatives.
  • Page 2 Jun. 11, 2019 Approved S. Morrison Added models T0006271 & T0006342 Dec. 9, 2019 Approved Added Proposition 65 Statements Herasymiuk Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 2 of 29...
  • Page 3: Table Of Contents

    Battery Installation ......................25 5.6. Installation du câble RF ....................27 5.7. Installation du câble Ethernet en cuivre ................ 27 Déclarations de conformité radio ..................28 Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 3 of 29...
  • Page 4: Product Description

    915-928 T0005216 T0005217 New Zealand 915-928 T0005218 T0005219 ✓ Singapore, Thailand, Vietnam 920-925 T0005221 T0005222 Singapore, Thailand, Vietnam 920-925 T0005223 T0005224 ✓ Taiwan 922-928 T0005225 Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 4 of 29...
  • Page 5 Figure 1 illustrates the Kona Micro Gateway external form-factor with the front view on the top and rear view on the bottom. All models share the same mechanical form-factor. Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 5 of 29...
  • Page 6 Figure 1: Kona Micro Gateway Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 6 of 29...
  • Page 7: Physical Interfaces

    DC Power Input Port Barrel Jack Center positive Ethernet Port RJ-45 Industry standard RJ45 plug 1.3. Specifications The Kona Micro Gateway specifications are listed in Table 3. Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 7 of 29...
  • Page 8 12 W DC maximum Battery 7.4 V Lithium Ion Ingress Protection use only CSA/UL 60950-1, IEC 60950-1 Regulatory Compliance FCC Pt. 15, RSS-247, EN 301 489-1 Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 8 of 29...
  • Page 9: Installation

    Kona Micro Gateway can be placed on a flat surface or can be mounted to a wall with M3 screws to locations on the back of the module illustrated in Figure 3. Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 9 of 29...
  • Page 10 Figure 3: Kona Micro Gateway Mounting Screw Locations While wall mounted, the Gateway module must be oriented with the TEKTELIC logo horizontal, parallel to the earth as shown in Figure 4. Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 10 of 29...
  • Page 11: Dc Power Cable Installation

    12 VDC with positive inner tip as shown below in Figure 5. The connector tip is a standard DC Barrel connector-straight plug with 2.1 mm (inner), 5.5 mm (outer) diameters. Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 11 of 29...
  • Page 12: Battery Installation

    Figure 5: DC Power Connection Polarity 2.5. Battery Installation Use only a battery provided by Tektelic Communications Inc. Dispose of old batteries in accordance with regulatory requirements. Remove the battery cover by removing the two Torx- drive battery cover securement screws. Connect the 3-pin battery connector to the connector at the bottom of the battery compartment and then insert the battery into the battery compartment as illustrated in Figure 6.
  • Page 13: Rf Cable Installation

    & nickel, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 13 of 29...
  • Page 14 Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 14 of 29...
  • Page 15: Radio Compliance Statements

    2.7 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. Antenna: ET830DBLTRPSMA – Airgain, Inc. Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 15 of 29...
  • Page 16 Before servicing the product, the antenna(s) or cables, turn off the transmission function or the unit power if you have to get closer than the minimum separation distance. Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 16 of 29...
  • Page 17: Description Du Produit

    915-928 T0005216 T0005217 New Zealand 915-928 T0005218 T0005219 ✓ Singapore, Thailand, Vietnam 920-925 T0005221 T0005222 Singapore, Thailand, Vietnam 920-925 T0005223 T0005224 ✓ Taiwan 922-928 T0005225 Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 17 of 29...
  • Page 18 La figure 7 illustre le facteur de forme externe Kona Micro Gateway avec la vue de face en haut et la vue arrière en bas. Tous les modèles partagent le même facteur de forme mécanique. Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 18 of 29...
  • Page 19 Figure 7: Passerelle intérieure Kona Micro Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 19 of 29...
  • Page 20: Interfaces Physiques

    Connecteur Barrel Centre positif d'alimentation CC Ethernet Port RJ-45 Industry standard RJ45 cable 4.3. Spécifications Les spécifications de Kona Micro Gateway sont répertoriées dans Table 6. Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 20 of 29...
  • Page 21 Batterie 7.4 V Lithium Ion Protection contre la Usage intérieur seulement pénétration CSA/UL 60950-1, IEC 60950-1 Conformité réglementaire FCC Pt. 15, RSS-247, EN 301 489-1 Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 21 of 29...
  • Page 22: Installation

    3. Ne jetez pas la boîte d'expédition ou les inserts en mousse car ils seront nécessaires si une unité est retournée pour réparation ou reconfiguration. Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 22 of 29...
  • Page 23: Kona Micro Gateway Montage

    Lorsqu'il est fixé au mur, le module Gateway doit être orienté avec le logo TEKTELIC horizontalement, parallèlement à la terre comme indiqué dans figure 9. Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 23 of 29...
  • Page 24: Installation Directe Du Câble D'alimentation Cc

    12 VDC avec embout interne positif comme indiqué ci-dessous dans Figure 10. L'embout du connecteur est un connecteur DC Barrel standard-fiche droite avec 2,1 mm (intérieur), 5,5 mm (extérieur) diamètres. Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 24 of 29...
  • Page 25: Battery Installation

    Figure 11: Polarité directe du connecteur d'alimentation CC 5.5. Battery Installation Utilisez uniquement une batterie fournie par Tektelic Communications Inc. Éliminez les batteries usagées conformément aux exigences réglementaires. Retirez le couvercle de la batterie en retirant les deux vis de fixation du couvercle de la batterie du lecteur Torx. Branchez le connecteur de la batterie à...
  • Page 26 Figure 12: Battery Installation Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 26 of 29...
  • Page 27: Installation Du Câble Rf

    Le câble Ethernet doit avoir un minimum de 24 conducteurs AWG et doit être classé pour une utilisation en intérieur conformément aux codes électriques locaux et nationaux. Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 27 of 29...
  • Page 28: Déclarations De Conformité Radio

    à 2,7 dBi sont strictement interdites pour cet appareil. L'impédance d'antenne requise est de 50 ohms. Antenne: ET830DBLTRPSMA - Airgain, Inc .. Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 28 of 29...
  • Page 29 Avant de réparer le produit, l'antenne ou les câbles, désactivez la fonction de transmission ou l'alimentation de l'unité si vous devez vous rapprocher de la distance de séparation minimale. Kona Micro User Guide T0005281_UG Version 1.2 TEKTELIC Communications Inc. Confidential Page 29 of 29...

Table of Contents