Page 2
Feb 20, 2018 Preliminary A.Narayanan Updated to new format for Quick start guide Jun 13, 2018 Released A.Narayanan Corrected Table 1 heading and LED behavior Kona Pico Gateway User Guide T0004280_UG Version 0.8 TEKTELIC Communications Inc. Confidential Page 2 of 11...
Unpacking and Inspection ....................8 Power UP and Commissioning and Monitoring ..............9 Required Equipment ......................9 Power Up Procedure ......................9 Operation, Alarms & Management ..................10 Kona Pico Gateway User Guide T0004280_UG Version 0.8 TEKTELIC Communications Inc. Confidential...
1 Product Description Overview Kona Pico gateway is a compact and cost effective LoRa base station for IoT applications. The product is designed to operate in the North American Industrial, Scientific and Medical (ISM) Band. The gateway supports two configuration options for backhaul connection, namely Ethernet only and Ethernet/Wi-Fi (optional).
Physical Interfaces Figure 2 illustrates the layout for the Kona Pico Gateway interfaces. 1. Ethernet activity LED 2. Gateway Power LED 3. 5V power connector 4. LoRa External Antenna connector 1. System Status LED 2. LoRa Activity LED 3. Future use...
Table 2 lists the connector types used for the interfaces on Kona Pico Gateway Table 2: Kona Pico Outdoor Gateway Interface Connector Types Interface Connector Type Mating Connector LoRa Antenna Port RPSMA Type female Industry standard RPSMA male Copper Ethernet Port...
2 What is in the Box 2.1 Product and installation material The Kona Pico Gateway along will all other materials included in the product box is pictured below and the entire its content is listed below. Pico Gateway AC Power adapter ...
3 Installation Safety Precautions The Kona Pico Gateway is for indoor use only. Do not connect Pico Gateway to outdoor antennas or outdoor network cables. The Kona Pico Gateway has no internal field serviceable parts. The Gateway module must only be opened by an approved TEKTELIC service center.
4 Power UP and Commissioning and Monitoring Required Equipment The following equipment is required for commissioning a Kona Pico Gateway. 1. A laptop running Windows XP/Vista/7. 2. A Cat5 or better Ethernet cable. Power Up Procedure Connect the provided external antenna to the gateway ...
Note that if the LED remains ON instead after the transfer, then the software update failed. In a successful update, the GW would reboot itself and the System LED will behave as it would on a power up. Kona Pico Gateway User Guide T0004280_UG Version 0.8 TEKTELIC Communications Inc.
Page 11
6 Bibliography [1] "Pico Gateway Conifguration User Guide," 2018. Kona Pico Gateway User Guide T0004280_UG Version 0.8 TEKTELIC Communications Inc. Confidential Page 11 of 11...
Need help?
Do you have a question about the Kona Pico and is the answer not in the manual?
Questions and answers