Apm Configuration - Asus PUNDIT-AE3 Manual

5.5.5 5.5.5 5.5.5

APM Configuration

APM Configuration APM Configuration
5.5.5 5.5.5 APM Configuration APM Configuration
Power Button Mode
Restore on AC Power Loss
Resume on Ring
Power Up By PCI Device
Resume on Keyboard
Resume on PS2 Mouse
Resume on RTC
Power Button Mode [On/Off] Power Button Mode [On/Off] Power Button Mode [On/Off] Power Button Mode [On/Off] Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the
power button is pressed. Configuration options: [On/Off] [Suspend]
Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off]
Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Resume On Ring [Disabled] Resume On Ring [Disabled]
Resume On Ring [Disabled] Resume On Ring [Disabled] Resume On Ring [Disabled]
Enables or disables the feature to power up the computer when the
external modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the
first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that turns the system
power on.
Power Up By PCI Device [Disabled] Power Up By PCI Device [Disabled] Power Up By PCI Device [Disabled]
Power Up By PCI Device [Disabled] Power Up By PCI Device [Disabled]
Enables or disables the feature to turn ON the system through a PCI LAN or
modem card. This feature requires an ATX power supply that provides at
least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Resume On Keyboard [Disabled] Resume On Keyboard [Disabled]
Resume On Keyboard [Disabled] Resume On Keyboard [Disabled] Resume On Keyboard [Disabled]
Allows you to disable or enable the PS/2 Power-On by keyboard feature.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead. Configuration options: [Disabled] [Enabled]
A S U S P u n d i t - A E 3 A S U S P u n d i t - A E 3 A S U S P u n d i t - A E 3 A S U S P u n d i t - A E 3 A S U S P u n d i t - A E 3
[On/Off]
[Power Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Go into On/Off,
Standby or Suspend
when Power Button is
pressed.
5 - 2 3 5 - 2 3 5 - 2 3 5 - 2 3 5 - 2 3