Replacing The Front Panel Assembly - Asus PUNDIT-AE3 Manual

After you install all the necessary components to the system, replace the
covers following the instructions in this section.
2.9.1 2.9.1 2.9.1

Replacing the front panel assembly

Replacing the front panel assembly Replacing the front panel assembly
2.9.1 2.9.1 Replacing the front panel assembly Replacing the front panel assembly
If you installed an optical drive, you must remove the optical drive bay
cover before you replace the front panel assembly.
To remove the optical drive bay cover:
1. Locate the optical drive bay
cover hook locks at the back
of the front panel assembly.
3. Push the optical drive bay cover
inward from the front panel
assembly to release.
A S U S P u n d i t - A E 3 A S U S P u n d i t - A E 3 A S U S P u n d i t - A E 3 A S U S P u n d i t - A E 3 A S U S P u n d i t - A E 3
2. Press one lock inward to
disengage the optical drive bay
cover from the front panel.
The photo below shows the
front panel assembly without
the optical drive bay cover.
2 - 1 9 2 - 1 9 2 - 1 9 2 - 1 9 2 - 1 9