Asus PUNDIT-AE3 Manual page 31

7. Carefully push the optical drive
all the way into the bay until the
optical drive lock clicks.
8. Connect a 4-pin power plug
from the power supply unit to
the power connector at the
back of the drive.
Uninstalling the optical drive Uninstalling the optical drive Uninstalling the optical drive Uninstalling the optical drive Uninstalling the optical drive
In the future, you may have to upgrade or replace a defective optical drive.
To uninstall the optical drive:
1. Remove the front panel assembly following the instructions in section
"2.3.2 Removing the front panel assembly".
2. Locate the optical drive screw
lock.
3. Push the lock to release the
optical drive screw (A), then
slightly pull the drive out from
the bay (B).
4. Disconnect the IDE, audio, and
power cables and plugs from
the back of the drive.
5. Pull out the drive completely
from the bay, then replace it
following the instructions in
the previous section.
A S U S P u n d i t - A E 3 A S U S P u n d i t - A E 3 A S U S P u n d i t - A E 3 A S U S P u n d i t - A E 3 A S U S P u n d i t - A E 3
B B B B B
A A A A A
2 - 1 5 2 - 1 5 2 - 1 5 2 - 1 5 2 - 1 5