Table of Contents
Advertisement
3.
Insert one retention clip hook to
the hole at the other side of the
retention module.
4.
Carefully press down the retention
clip locking lever until the hook
attaches to retention module
hole.
5.
Install the second retention clip.
Make sure that the retention clip
locking levers are on opposite
corners. Refer to the illustration
on the right.
6.
Connect the CPU fan cable to the
CPU fan connector on the
motherboard. Refer to Chapter 4
for the location of the CPU fan
connector.
A S U S P u n d i t - A E 3
A S U S P u n d i t - A E 3
A S U S P u n d i t - A E 3
A S U S P u n d i t - A E 3
A S U S P u n d i t - A E 3
2 - 7
2 - 7
2 - 7
2 - 7
2 - 7
Advertisement
Table of Contents
