Set User Password - Gigabyte GS-R12T4H2-RH Service Manual

1u rack mount server

Hide thumbs Also See for GS-R12T4H2-RH:

Table of Contents

GS-R12T4H2-RH Rack Mount Server

Set User Password

You can only enter but do not have the right to change the options of the setup menus. When

you select this function, the following message will appear at the center of the screen to assist

you in creating a password.

Type the password up to 6 characters in lengh and press <Enter>. The password typed now

will clear any previously entered password from the CMOS memory. You will be asked to

confirm the entered password. Type the password again and press <Enter>. You may also

press <Esc> to abort the selection and not enter a specified password.

Password on boot

Password entering will be required when system on boot.

Enabled

Disabled

Requries entering password when system on boot.

Disable this function. (Default setting)

7 3

Table of Contents