Set User Password - Gigabyte GS-R22T61 Service Manual

Set User Password

You can only enter but do not have the right to change the options of the setup menus. When
you select this function, the following message will appear at the center of the screen to assist
you in creating a password.
Type the password up to 6 characters in lengh and press <Enter>. The password typed now
will clear any previously entered password from the CMOS memory. You will be asked to
confirm the entered password. Type the password again and press <Enter>. You may also
press <Esc> to abort the selection and not enter a specified password.
Password on boot
Password entering will be required when system on boot.
Enabled
Disabled
Security Mode for PWR/RST Button
Enabled
Disabled
Clear Case Open Status
Press [Enter] to clear the case open status.
TPM Support
TPM, stands for Trusted Platform Module. A Trusted Platform Module provides function for
secure generation of cryptographic keys, the ability to limit the use of cryptographic keys, as
well as a hardware pseudo-random number generator.
Enabled
Disabled
Current TPM State
Displays the current TPM State status.
Change TPM State
No Change
Enable & Activate
Deactivate & Disable Disable and deactivate TPM State.
Clear
Requries entering password when system on boot.
Disable this function. (Default setting)
Enable Security Mode for PWR/RST Button.
Disable this function. (Default setting)
Enable TPM Support.
Disable this function. (Default setting)
No configuration on TPM State. (Default setting)
Enable and activate TPM State.
Clear the TPM stored information on the TPM.
7 8
BIOS Setup