ZURN Cumberland Series Installation, Operation, Maintenance And Parts Manual

Soap dispenser sensor-operated lavatory faucets for battery or plug-in installations

Advertisement

Sensor-Operated
Lavatory Soap Dispenser
All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of three years from
the date of purchase. Decorative finishes warranted for one year. We will replace at no costs goods that prove defective provided
we are notified in writing of such defect and the goods are returned to us prepaid at Sanford, NC, with evidence that they have been
properly maintained and used in accordance with instructions. We shall not be responsible for any labor charges or any loss, injury or
damages whatsoever, including incidental or consequential damages. The sole and exclusive remedy shall be limited to the replace-
ment of the defective goods. Before installation and use, the purchaser shall determine the suitability of the product for his intended
use and the purchaser assumes all risk and liability whatever in connection therewith. Where permitted by law, the implied warranty of
merchantability is expressly excluded. If the products sold hereunder are "consumer products," the implied warranty of merchantabi-
lity is limited to a period of three years and shall be limited solely to the replacement of the defective goods. All weights stated in our
catalogs and lists are approximate and are not guaranteed.
NOTICE: READ ENTIRE MANUAL PRIOR TO INSTALLING PRODUCT.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
ADVERTENCIA: Cáncer y daño reproductivo - www.P65Warnings.ca.gov
AVERTISSEMENT: Cancer et effets néfastes sur la reproduction - www.P65Warnings.ca.gov
NOTE: The information in this manual is subject to change at any time without notice. Installations may
be performed at different times of construction by different individuals. For this reason, these instructions
should be left on-site with the facility or maintenance manager.
Rev. B | Date: 07/10/24 | C.N. No. 146175 | Prod./Dwg. No. FV626
Patent zurn.com/patents
US 1.855.ONE.ZURN CANADA 1.877.892.5216
ZURN.COM
Cumberland Series™
Soap Dispenser
Sensor-Operated Lavatory Faucets for
Battery or Plug-In Installations.
Installation, Operation, Maintenance,
and Parts Manual
Z6956-SD
Cumberland Series™
LIMITED WARRANTY

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Cumberland Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ZURN Cumberland Series

  • Page 1 For this reason, these instructions should be left on-site with the facility or maintenance manager. Rev. B | Date: 07/10/24 | C.N. No. 146175 | Prod./Dwg. No. FV626 Patent zurn.com/patents US 1.855.ONE.ZURN CANADA 1.877.892.5216 ZURN.COM...
  • Page 2: Specifications

    100 - 3500 cPs Soap Viscosity: Important Safety Information Optional Accessories • Do not convert or modify this Zurn product. All warranties will be voided. • All plumbing is to be installed in accordance with applicable codes and regulations. • Sensor units should not be located across from each other or in close proximity to highly reflective surfaces.
  • Page 3: Package Contents

    Package Contents Cumberland Liquid Soap Control Box Assembly & Dispenser Assembly Mounting Bracket 6x Mounting Screws 6x Plastic Wall Anchors Soap Bottle Battery Enclosure AC Adapter 2x Hose Clamps FV626 Rev. B 07/10/24 Page 1...
  • Page 4: Spout Installation

    Spout Installation Feed the sensor cable and soap tube through the mounting hole in the basin or counter top. Install the mounting shank through the hole and align the dispenser with the basin. Note: The recommended through hole for this dispenser is 1”- 1 ¼”...
  • Page 5: Control Box Installation

    Control Box Installation Note: It is recommended to test fit the assembly Hang the control box on the wall hanger. Ensure the prior to installation to avoid interference with other control box is properly engaged with the wall hanger. components. Place the wall hanger on the wall as a guide and mark the location of the screw holes.
  • Page 6 Note: This step is only necessary if utilizing the Attach the power supply to the control box. This battery pack to power the unit. Mount the battery dispenser can be powered in one of three ways: A/C pack in an easily accessible area. adapter, battery pack, or A/C with a battery backup.
  • Page 7 Each Cumberland Liquid Soap Dispenser comes calibrated from the factory to work optimally in most restroom environments. In low light or highly reflective environments. However, it may be necessary to adjust the calibration distance at times. To do this, a Zurn Magic Magnet may be used.
  • Page 8: Troubleshooting Guide

    Optional Stud Mounting Bracket Installation Zurn P6900-SD-BKT Stud Mounting Bracket can be incorporated with the provided standard control box mounting bracket to install in 4 different orientation to fit the soap dispenser control box assembly under the lavatory. Reference any of the steps below based on your specific circumstance to mount the assembly.

This manual is also suitable for:

Cumberland z6956-sd

Table of Contents