ZURN Sundara Z5001.02 Installation, Operation, Maintenance And Parts Manual

ZURN Sundara Z5001.02 Installation, Operation, Maintenance And Parts Manual

Reef double basin hand washing system

Advertisement

Quick Links

Sundara
Reef Double Basin
®
Hand Washing System
All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of three years from the
date of purchase. Decorative finishes warranted for one year. We will replace at no costs goods that prove defective provided we are
notified in writing of such defect and the goods are returned to us prepaid at Atlanta, GA, with evidence that they have been properly
maintained and used in accordance with instructions. We shall not be responsible for any labor charges or any loss, injury or damages
whatsoever, including incidental or consequential damages. The sole and exclusive remedy shall be limited to the replacement of the
defective goods. Before installation and use, the purchaser shall determine the suitability of the product for his intended use and the
purchaser assumes all risk and liability whatever in connection therewith. Where permitted by law, the implied warranty of merchantabi-
lity is expressly excluded. If the products sold hereunder are "consumer products," the implied warranty of merchantability is limited to
a period of three years and shall be limited solely to the replacement of the defective goods. All weights stated in our catalogs and lists
are approximate and are not guaranteed.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
ADVERTENCIA: Cáncer y daño reproductivo - www.P65Warnings.ca.gov
AVERTISSEMENT: Cancer et effets néfastes sur la reproduction - www.P65Warnings.ca.gov
NOTE: The information in this manual is subject to change at any time without notice. Installations may
be performed at different times of construction by different individuals. For this reason, these instructions
should be left on-site with the facility or maintenance manager.
NOTE: READ ENTIRE MANUAL PRIOR TO INSTALLING PRODUCT.
ZURN INDUSTRIES, LLC 5900 Elwin Buchanan Drive, Sanford, NC U.S.A. 27330, Ph. 1-800-997-3876, Fax 919-775-3541
In Canada: ZURN INDUSTRIES LIMITED 7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6, Ph. 905-405-8272, Fax 905-405-1292
Rev. A
Date: 8/6/2018
C.N. No. SAN008335
Z5001.02
Sundara
Hand Washing System
Installation, Operation, Maintenance
and Parts Manual
Patented and Patents Pending
LIMITED WARRANTY
Prod. | Dwg. No. FV606
Reef Double Basin
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sundara Z5001.02 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ZURN Sundara Z5001.02

  • Page 1 NOTE: READ ENTIRE MANUAL PRIOR TO INSTALLING PRODUCT. ZURN INDUSTRIES, LLC 5900 Elwin Buchanan Drive, Sanford, NC U.S.A. 27330, Ph. 1-800-997-3876, Fax 919-775-3541 In Canada: ZURN INDUSTRIES LIMITED 7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6, Ph. 905-405-8272, Fax 905-405-1292 Rev. A Date: 8/6/2018 C.N.
  • Page 2: Specifications

    Specifications: Sundara Reef double basin lavatory system manufactured by Zurn Industries. Lavatory shall be mounted at standard height ® to conform with ANSI, UFAS, TAS and ADA Accessibility Standards. Counter and integral basin to be constructed of Sundara ®...
  • Page 3 Z5001.02 Parts List Item Name Basin Optional Shroud Wall Bracket Shroud Mounting (L) Bracket "Wall Hanger Bracket (Available only for Retrofit)" Grid drain Water Supply Items Drain Adapter Assembly P Trap Assembly 10 Sensor Faucet 11 Soap Dispenser (If Ordered) 12 "5/16-18 Screw for Mounting L Bracket to Basin"...
  • Page 4 Plumbing and Electrical Rough-Ins FV606 Rev. A 8/6/2018 Page 4...
  • Page 5: Required Tools

    L Brackets Installation Drain Adapter Assembly Installation For ease of installion, lay basin on its top surface on a For ease of installion, lay basin on its top surface on a cush- cushioned surface. ioned surface. Use T25 torx wrench to torque the screws (approximately Use socket wrench to torque the screws (approximately 4-5 4-5 complete turns and squeeze the gasket, approximately complete turns bottom out approximately 5 ft-lbs of torque).
  • Page 6: Faucet Installation

    Faucet Installation For ease of installion, lay basin on its back. Refer to faucet installation guide for details. Soap Dispenser Installation For ease of installion, lay basin on its back. Install the soap spout on right or left soap hole as applicable. Refer to soap dispenser installation guide for details.
  • Page 7: Installing Mounting Bracket

    Retrofitting Hanger Bracket Wall Stud Plywood Installation Hanger Bolt supplied by Bracket installer to attach the plywood to wall studs Recommended for retrofit: • Measure the rough in dimensions on the wall. Top edge of the cutout marked must be 2” below the basin top back edge. •...
  • Page 8 Installing with Carrier Option Warning: Must be handled by at least 2 people Avertissement : s’y prendre à deux minimum. Refer to Carrier Rough-in & Installation guide for details. Soap Dispenser Bracket and Bottle Installation Refer to soap dispenser installation guide for details. FV606 Rev.
  • Page 9: Shroud Installation

    P Trap Installation & Water Supply Connection to Faucet Connect the tail piece to drain adapter (threaded connection) Adjust the tail piece base on drain outlet on the wall. Grid Drain Installation Shroud Installation: Step 1 Use T10 Torx wrench to attach the grid drain to basin. Torque screws until the screw heads are flushed with the screw pocket of grid drain.
  • Page 10 Shroud Installation: Step 2 Step 3 • Remove the wall bracket and drill 3/4” holes into the center of the holes previously marked. (Note: For installation with carrier, do NOT drill the two outside holes. For retrofit applications, the two outside holes are recommended.) En- sure that wall studs are not immediately behind the marked •...
  • Page 11: Maintenance Instructions

    Repair Instructions: • Zurn recommends that damages should be repaired by certified solid surface fabricator or repair agents. • Blemishes to the basin surface (such as scratches, burnmarks, and minor chipping) can be repaired by sanding with super-fine(800 or 1000 grit) sand paper and/or maroon Scotch-Brite™...

Table of Contents