Igmp Snooping Status - D-Link DES-3226S User Manual

Router Ports
This displays which of the Switch's ports are currently configured as router ports. A router port configured by a user (using the
console or Web-based management interfaces) is displayed as a static router port, designated by S. A router port that is
dynamically configured by the Switch is designated by D.
To view the Router Port table, click on the Router Ports link:
S signifies a static router port, configured by the user.
D signifies a dynamically assigned router port, configured by the Switch.

IGMP Snooping Status

This allows the Switch's IGMP Snooping table to be viewed. IGMP Snooping allows the Switch to read the Multicast Group
IP address and the corresponding MAC address from IGMP packets that pass through the Switch. The ports where the IGMP
packets were snooped are displayed, signified with an M. The number of IGMP reports that were snooped is also displayed in
the Reports field.
To view the IGMP Snooping table, click on the IGMP Snooping Status link:
The following fields can be set or are displayed.
Parameter
Multicast Group
MAC Address
Reports
DES-3226S Layer 2 Fast Ethernet Switch User's Guide
Figure 6 - 98. Browse Router Port
Figure 6 - 99. IGMP Snooping Status
Description
The IP address of the multicast group.
The MAC address of the multicast group.
The total number of reports received for this group.
110