Management; Switch Stacking - D-Link DES-3226S User Manual

Layer 2 switch
Hide thumbs Also See for DES-3226S:
Table of Contents

Advertisement

Management

RS-232 console port for out-of-band network management via a console terminal or PC.
IEEE 802.1w Rapid Spanning Tree Algorithm Protocol for creation of alternative backup paths and prevention of
network loops.
SNMP (v.1, v.2, v.3) Agent.
IEEE 802.1X Support
Port Security
Fully configurable either in-band or out-of-band control via console serial connection.
Flash memory for software upgrades. This can be done in-band via TFTP or out-of-band via the console. Download
the latest Switch firmware from the D-Link website.
Built-in SNMP management:
Bridge MIB (RFC 1493)
MIB-II (RFC 1213)
Mini-RMON MIB (RFC 1757) – 4 groups
802.1p MIB (RFC 2674).
IF MIB (RFC 2233)
Ether-Like MIB (RFC 1643)
Supports Web-based management.
CLI management support
TFTP support.
BOOTP support.
DCHP Client support.

Switch Stacking

The DES-3226S can be used as a standalone or stacked Switch − using the optional stacking module. Up to 8 Switches may be
stacked and managed as a unit with a single IP address.
Management for the entire stack is done through the Master Switch.
You may add Switches later as needed.
The Switch can also be grouped in a stack as a slave with the D-Link DGS-3212SR or DGS-3312SR Switch (acting as the
Master).
Fast Ethernet Technology
100Mbps Fast Ethernet (or 100BASE-T) is a standard specified by the IEEE 802.3 LAN committee. It is an extension of the
10Mbps Ethernet standard with the ability to transmit and receive data at 100Mbps, while maintaining the Carrier Sense
Multiple Access with Collision Detection (CSMA/CD) Ethernet protocol.
Gigabit Ethernet Technology
Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure, format, and support for CSMA/CD
protocol, full duplex, flow control, and management objects, but with a tenfold increase in theoretical throughput over
100Mbps Fast Ethernet and a one hundred-fold increase over 10Mbps Ethernet. Since it is compatible with all 10Mbps and
100Mbps Ethernet environments, Gigabit Ethernet provides a straightforward upgrade without wasting a company's existing
investment in hardware, software, and trained personnel.
DES-3226S Layer 2 Fast Ethernet Switch User's Guide
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents